S10 Series SIO Driver
GP-Pro EX Device/PLC Connection Manual
18
4
Setup Items
Set communication settings of the Display with GP-Pro Ex or in offline mode of the Display.
The setting of each parameter must be identical to that of the External Device.
)
"3 Example of Communication Setting" (page 8)
4.1
Setup Items in GP-Pro EX
Communication Settings
To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC].
Setup Items
Setup Description
SIO Type
Select the SIO type to communicate with the External Device.
Speed
Select the communication speed between the External Device and the Display.
Data Length
Select data length.
Parity
Select how to check parity.
Stop Bit
Select stop bit length.
Flow Control
Select the communication control method to prevent overflow of transmission and
reception data.
Timeout
Use an integer from 1 to 127 to enter the time (s) for which the Display waits for the
response from the External Device.
Retry
In case of no response from the External Device, use an integer from "0 to 255" to enter
how many times the Display retransmits the command.
Wait To Send
Use an integer from "0 to 255" to enter standby time (ms) for the Display from receiving
packets to transmitting next commands.
Continues to the next page.
