Operation Instructions
6
Operation Instructions
◆
Timer Operation
＊
Function
●
This Function is used to start or stop operation after
a set time.
●
The timer operation can be set by the ON/OFF
TIMER switch.
" ON TIMER "
：
Press the ON/OFF TIMER switch when the system is
stopped. The operation is started after a set time.
" OFF TIMER "
：
Press the ON/OFF TIMER switch when the system is
operated. The operation is stopped after a set time.
Step 1
Press the ON/OFF TIMER switch.
(Indication when setting "ON TIMER")
" ON TIMER " is indicated in case that the system is
stopped.
" OFF TIMER " is indicated in case that the system is
operated.
Step 2
Press the TIME
△
or
▽
switch, and set your
required time.
(Indication when setting 8.5 hours for timer operation)
●
The set time is increased by 0.5 hours by pressing
the
△
switch (Max. 72.0 hours) and decreased by
0.5 hours by pressing the
▽
switch (Min.0.5hours).
●
In case that the required time is not set, the set time
is automatically indicated at 8.0 hours.
Cancel
Press the ON/OFF TIMER switch again.
◆
Ventilation
＊
Function
●
A/C (Air Conditioning)
：
To operate the air conditioner
individually.
●
VENTI (Ventilation)
：
To operate the total heat
exchanger unit individually.
●
A/C + VENTI
：
To operate the air conditioner and the
total heat exchanger together.
＊
RPS-5AN has no function of ventilation
ATTENTION
●
This function is available only when the total heat
exchanger is connected.
When the procedures below are performed without
the total heat exchanger connected, " NO
FUNCTION " flickers for 5 seconds.
Ventilation
Press the VENTI switch.
(Indication when setting " A/C + VENTI ")
By repeatedly pressing the VENTI switch, the
indication is changed in order of A/C, VENTI and A/C +
VENTI.
