14 indoor unit installation
!
d a n G e r
• Do not install the indoor unit in a flammable environment to
avoid fire or an explosion.
• Do not put any foreign material into the indoor unit and check to
ensure that none exists in the indoor unit before the installation
and the test run. Otherwise, a fire or failure, etc. may occur.
• Check to ensure that the wall is strong enough. If not strong
enough, the indoor unit may fall down on you.
• Do not install the indoor unit outdoors. If installed outdoors, an
electric hazard or electric leakage will occur.
14.1 factory-suPPlied accessories
Check to ensure that the following accessories are packed with
the indoor unit.
The hose clamp, screws, washers and cord clamps are put in
the pipe insulation.
?
n o t e
• If any of these accessories are not packed with the unit, please
contact your contractor.
• The remote control switch, the branch pipes and the transition wires
are optional accessories which are not included with the indoor unit.
accessory
Q'ty
Purpose
Suspension bracket
2
For mounting indoor unit
Washer
8
For suspension bracket
Pipe insulation
(large)
1
For refrigerant piping connection
Pipe insulation
(small)
1
Cord clamp
(large)
6
For fixing insulation
Cord clamp
(small)
1
For fixing plug
Drain hose
1
For connection drain pipe
Hose clamp
2
For connecting drain hose
Insulation
2
For drain hose connection
Installation and operation manual
1
-
INDOOr UNIT INSTALLATION
PMML0254A rev.4 - 12/2018
24
