manualshive.com logo in svg

Hitachi Relion 670 Series, Руководство по эксплуатации продукта

Hitachi Relion 670 Series - надежные и инновационные решения для управления проектами. Для доступа к руководству пользователя, загрузите бесплатное руководство по продукту с manualshive.com. Узнайте больше о функциональности и удобстве использования этой серии продуктов.

Поделиться
Скачать
background image

• Low active power trip with 2 selection modes '1 out of 3'

and '2 out of 3'

• Phase wise calculated values of apparent power, reactive

power, active power and power factor are available as
service values

• Insensitive to small variations in voltage and current

Compensated over and undervoltage protection
COUVGAPC

GUID-229EB419-0903-46FA-9192-BBB35725C841 v2

Compensated over and undervoltage protection
(COUVGAPC) function calculates the remote end voltage of
the transmission line utilizing local measured voltage,
current and with the help of transmission line parameters,
that is, line resistance, reactance, capacitance and local
shunt reactor. For protection of long transmission line for in
zone faults, COUVGAPC can be incorporated with local
criteria within direct transfer trip logic to ensure tripping of
the line only under abnormal conditions.

Sudden change in current variation SCCVPTOC

GUID-413851A9-5EB7-4C48-8F5D-E30E470EFFAF v2

Sudden change in current variation (SCCVPTOC) function
is a fast way of finding any abnormality in line currents.
When there is a fault in the system, the current changes
faster than the voltage. SCCVPTOC finds abnormal
condition based on phase-to-phase current variation. The
main application is as a local criterion to increase security
when transfer trips are used.

Carrier receive logic LCCRPTRC

GUID-79AB9B9E-9200-44D7-B4EE-57C9E7BB74A9 v2

In Direct transfer trip (DTT) scheme, the received CR signal
gives the trip to the circuit breaker after checking certain
local criteria functions in order to increase the security of
the overall tripping functionality. Carrier receive logic
(LCCRPTRC) function gives final trip output of the DTT
scheme.

Features:

• Carrier redundancy to ensure security in DTT scheme
• Blocking function output on CR Channel Error
• Phase wise trip outputs

Negative sequence overvoltage protection LCNSPTOV

GUID-C5CBB6A2-780D-4008-98E3-455A404D32CB v2

Negative sequence components are present in all types of
fault condition. Negative sequence voltage and current get
high values during unsymmetrical faults.

Zero sequence overvoltage protection LCZSPTOV

GUID-4CF3EC6A-D286-4808-929B-C9302418E4ED v2

Zero sequence components are present in all abnormal
conditions involving earth. They can reach considerably
high values during earth faults.

Negative sequence overcurrent protection LCNSPTOC

GUID-C4F99554-88BC-4F11-9EFE-91BCA6ED1261 v2

Negative sequence components are present in all types of
fault condition. They can reach considerably high values
during abnormal operation.

Zero sequence overcurrent protection LCZSPTOC

GUID-F0C38DA1-2F39-46DE-AFFE-F919E6CF4A57 v2

Zero sequence components are present in all abnormal
conditions involving earth. They have a considerably high
value during earth faults.

Three phase overcurrent LCP3PTOC

GUID-AC4FF35E-5D86-421E-82C7-93F600E9F453 v2

Three phase overcurrent (LCP3PTOC) is designed for
overcurrent conditions.

Features:

• Phase wise start and trip signals
• Overcurrent protection
• Phase wise RMS current is available as service values
• Single definite time stage trip function.

Three phase undercurrent LCP3PTUC

GUID-E8EA5CE8-ED7A-4FA3-9DAC-83227D53387F v3

Three phase undercurrent function (LCP3PTUC) is
designed for detecting loss of load conditions.

Features:

• Phase wise start and trip signals
• Phase wise RMS current is available as service values
• Single definite time stage trip function

15. Logic

Tripping logic SMPPTRC

M12275-3 v15

A function block for protection tripping and general start
indication is always provided as a basic function for each
circuit breaker. It provides a settable pulse prolongation
time to ensure a trip pulse of sufficient length, as well as all
functionality necessary for correct co-operation with
autoreclosing functions.

The trip function block includes a settable latch function for
the trip signal and circuit breaker lockout.

The trip function can collect start and directional signals
from different application functions. The aggregated start
and directional signals are mapped to the IEC 61850 logical
node data model.

General start matrix block SMAGAPC

GUID-BA516165-96DE-4CD9-979B-29457C7653C0 v3

The Start Matrix (SMAGAPC) merges start and directional
output signals from different application functions and
creates a common start and directional output signal
(

STDIR

) to be connected to the Trip function.

The purpose of this functionality is to provide general start
and directional information for the IEC 61850 trip logic data
model SMPPTRC.

Trip matrix logic TMAGAPC

M15321-3 v14

The trip matrix logic (TMAGAPC) function is used to route
trip signals and other logical output signals to different
output contacts on the IED.

Line differential protection RED670

1MRK 505 379-BEN R

Version 2.2

 

Hitachi Energy

51

© 2017 - 2022 Hitachi Energy. All rights reserved

Содержание Relion 670 Series

































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Relion 670 Series

UE 120 Series Installation And Maintenance Instructions preview
120 Series
Бренд: UE Страницы: 4
BADODOSECURITY G200 Quick Manual preview
G200
Бренд: BADODOSECURITY Страницы: 8
GEA VARIVENT D Series Operating Instruction preview
VARIVENT D Series
Бренд: GEA Страницы: 78
GEA T-smart 7 Operating Instruction preview
T-smart 7
Бренд: GEA Страницы: 96
GEA T.VIS P-15 Operating Instruction preview
T.VIS P-15
Бренд: GEA Страницы: 66
UNI EV Series Operating And Mounting Manual preview
EV Series
Бренд: UNI Страницы: 21
OBSIDIAN CONTROL SYSTEMS NX4 Installation Manual preview
NX4
Бренд: OBSIDIAN CONTROL SYSTEMS Страницы: 13
Rain Bird PAR+ES Installation Manual preview
PAR+ES
Бренд: Rain Bird Страницы: 24
Rain Bird ESP-LXIVM Series Device Installation Manuallines preview
ESP-LXIVM Series
Бренд: Rain Bird Страницы: 16
RADVision SCOPIA 400 Platform Manual preview
SCOPIA 400
Бренд: RADVision Страницы: 39
QNAP KoiBox-100W Quick Start Manual preview
KoiBox-100W
Бренд: QNAP Страницы: 35
Rabe PILOT Original Instructions Manual preview
PILOT
Бренд: Rabe Страницы: 61
Racal Instruments 1260 VXI Instructions Manual preview
1260 VXI
Бренд: Racal Instruments Страницы: 35
YASKAWA PROFINET V1000 Technical Manual preview
PROFINET V1000
Бренд: YASKAWA Страницы: 49
M-system MSP10 Instruction Manual preview
MSP10
Бренд: M-system Страницы: 17
Universal Remote Genesis MX-900 Manual preview
Genesis MX-900
Бренд: Universal Remote Страницы: 20
Simplex F18804 Installation Instructions Operating Instructions preview
F18804
Бренд: Simplex Страницы: 40
Mold-Masters TempMaster M2 Plus Series Quick Manual preview
TempMaster M2 Plus Series
Бренд: Mold-Masters Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды