background image

Declaration of Conformity

(Manufacturer’s Declaration) 

Qingdao Hisense Hitachi Air-conditioning Systems Co., Ltd. 

Add.: No. 218, Qianwangang Road, Economic and Technological Development Zone, Qingdao,China

 

declares under its sole responsibility that the air conditioning models to which this declaration relates: 

RCI-1.0FSKDN1Q, RCI-1.5FSKDN1Q, RCI-2.0FSKDN1Q, RCI-2.3FSKDN1Q, RCI-2.5FSKDN1Q, 

RCI-3.0FSKDN1Q, RCI-4.0FSKDN1Q, RCI-5.0FSKDN1Q, RCI-6.0FSKDN1Q

are in conformity with the following standard(s) or other normative document(s), provided that these 

are used in accordance with our instructions:  

following the provisions of: 

Directives, as amended. 

Manufacturing number and manufacturing year: refer to model Nameplate. 

Notes:   

This declaration becomes invalid, if technical or operational modifications are introduced 

without the manufacturer's consent. 

Johnson Controls Hitachi Air Conditioning Europe SAS is authorized to compile technical file or 

relevant technical documentation.

Address :  Rue de Lombardie, Parc Aktiland II – 69800 Saint Priest, France

EN 60335-1  

EN 60335-2-40  

EN 62233

 

 

EN 55014-1  

EN IEC 61000-3-2  

EN 61000-3-3  

EN 55014-2

2006/42/EC 

2014/30/EU 

2012/19/EU 

2011/65/EU 

2014/35/EU  

1907

/

2006

/EC 

 

Name, Surname

  

 :  

 

Position/ Title

            

Date

 : 

  Director 

  :

 

Oct

.

 

20

, 2021

Содержание RCI-1.0FSKDN1Q










Отзывы: