Hitachi RAK-18QXA, Руководство пользователя

Страница: 11 / 14

– 11 –
EN
G
L
ISH
2. Washable Front Panel
O
Remove the front panel and wash with clean water.
Wash it with a soft sponge.
After using neutral detergent, wash thoroughly with
clean water.
O
When front panel is not removed, wipe it with a soft
dry cloth. Wipe the remote controller thoroughly with
a soft dry cloth.
O
Wipe the water thoroughly.
If water remains at indicators or signal receiver of
indoor unit, it causes trouble.
Method of removing the front panel.
Be sure to hold the front panel with both hands to
detach and attach it.
!
CAUTION
O
Do not splash or direct water to the body of the unit when cleaning it as
this may cause short circuit.
O
Never use hot water (above 40°C), benzine, gasoline, acid, thinner or a
brush, because they will damage the plastic surface and the coating.
Removing the Front Panel
O
When the front panel is fully opened with both
hands, push the right arm to the outside to
release it, and while closing the front panel
slightly, pull it out forward.
Attaching the Front Panel
O
Move the projections of the left and right arms
into the
Flanges in the unit and securely insert
them into the holes.
Projection
Hole
Flange
Arm