Ð4
9Ð
Press the FUNCTION selector so that the display indicates
(COOL).
As the settings are stored in memory in the remote controller, you only have
to press the
(START/STOP) button next time.
Set the desired FAN SPEED with the
(FAN SPEED) button (the
display indicates the setting).
(AUTO) : The FAN SPEED is HI at first and varies to MED
automatically when the preset temperature has
been reached.
(HI)
: Economical as the room will become cool quickly.
(MED)
: Quiet.
(LOW)
: More quiet.
Set the desired roomtemperature with the TEMPERATURE buttons
(the display indicates the setting).
The temperature setting and the actual room temperature may vary
somewhat depending on conditions.
Press the
(START/STOP) button. Cooling operation starts with a
beep. Press the button again to stop operation.The cooling function
does not start if the temperature setting is higher than the current
roomtemperature (even though the
(OPERATION) lamp lights).
The cooling function will start as soon as you set the temperature
below the current roomtemperature.
Use the device for cooling when the outdoor temperature is 22-42¡C.
If humidity is very high (over 80%) indoors, some dew may form on the air outlet grille of the indoor unit.
You can use the device simply as an air circulator. Use this function to dry the interior of the indoor unit at
the end of summer.
É When the AUTO fan speed mode is set in the cooling/heating operation:
For the cooling operation
For the heating operation
¥ The fan speed will automatically change according to the temperature of
discharged air.
¥ As room temperature reaches the preset temperature, a very light breeze
will blow.
¥ Operation starts in the ÒHIÓ mode to reach the preset temperature.
¥ As room temperature approaches the preset temperature, fan speed
automatically switches to ÒLOWÓ.
Press the
(START/STOP) button.Fan operation starts with a beep.
Press the button again to stop operation.
Press the
(FAN SPEED) button.
(HI)
: The strongest air blow.
(MED)
: Quiet.
(LOW)
: More quiet.
Press the FUNCTION selector so that the display indicates
(FAN).
