Hitachi RAC-50FPA Скачать руководство пользователя страница 15

Страница: 15 / 101

– 16 –

POWERFUL OPERA

TION

By pressing

(POWERFUL) button during

AUT

O, HEA

TING, DEHUMIDIFYING, COOLING or F

operation, the air conditioner performs an the maximuum power.

During POWERFUL

operation, cooler or warmer air

will be blown out from indoor unit for COOLING

HEA

TING operation respectively

start POWERFUL

operation

cancel POWER

erati

NOTE

When SLEEP

mode, ECO mode, SILENT

mode or LEA

E HOME mode is s

lected,

POWERFUL

operation is cancelled.

During POWERFUL

operation, capacity of the air conditioner will not increase

–

if the air conditioner is already running at maximum capacity

–

just before defrost operation (when

the

air conditioner is running

in HEA

TING operation).

After auto restart, POWERFUL

operation is cancelled and previous operation shall start.

For multi model connections, POWERFUL operation may not function depending on operation conditions.

Press

(POWERFUL) button during operation.

“

” is displayed on the LCD.

POWERFUL

operation ends in 20 minutes.

Then the system

automatically operates with the previous settings used before

POWERFUL

operation.

Press

(POWERFUL) button again.

POWERFUL

operation stops.

“

” disappears from the LCD.

Press (START/

STOP) button.Or

– 17 –

SILENT OPERA

TION

pressing

(SILENT) button during

AUT

O, HEA

TING, DEHUMIDIFYING, COOLING or F

operation, the fan speed will change to ultra slow.

start SILENT operation

cancel SILENT operation

Press

(SILENT) button during operation.

“

” is displayed on the LCD. Fan speed will be ultra

slow

Press

(ST

T/ST

OP) button. Or

Press

(SILENT) button again or

AN SPEED)

button.

Fan speed will return to previous fan speed before SILENT

operation starts.

SILENT

operation stops.

“

” disappears from the LCD.

NOTE

When POWERFUL

operat

ion is selected, SILENT

operation is

cancelled. Fan speed

will return to

previous fan speed before SILENT

operation.

After auto restart, SILENT

operation is cancelled. Fan speed will return to previous

fan speed before SILENT

operation.

During any operation with fan speed

(SILENT), if press

(SILENT) button, fan speed will

not change.

Содержание RAC-50FPA






































































































Результаты поиска

Содержание RAC-50FPA

Отзывы:

Бренды по названию

Популярные бренды

Hitachi RAC-50FPA, Руководство по обслуживанию

Результаты поиска

Содержание RAC-50FPA

Отзывы:

Бренды по названию

Популярные бренды