– 20 –
WEEKLY TIMER OPERATION
Ƶ
Press
(WEEKLY) button.
lights up.
and
blink on the
display. (Mode A is selected).
Press
(WEEKLY) button again,
and
blink on the display.
(Mode B is selected).
ƽ
If no reservation has been made, ON/OFF,
,
appear.
ƽ
If reservation has been made, ON/OFF,
,
will not
appear.
Press
(WEEKLY) button for about 3 seconds. The selection mode
can be changed.
, day: Mon, program no. : 1, ON/OFF, setting time and setting
temperature blink on the display.
Press
(DAY) button.
The day changes from Mon Tue Wed Thu Fri Sat Sun
Mon, Tue, Wed, Thu, Fri, Sat, Sun [Full days]
Mon, Tue, Wed, Thu,
Fri [weekday]
Sat, Sun [weekend]
Mon
Tue ......
Select [Full days] for daily reservation.
Select [weekday] for Monday to Friday reservation.
Select [weekend] for Saturday and Sunday reservation.
ƽ
After reservation has been set, it is easy to check and edit at the same
time.
4. Press
button to select a program number.
The number changes from 1
2
3
4
5
6
1
2 .....
ƽ
If program number has been set, follow above in order to make
changes.
1
2
Step 1 : Set the reservation schedule to the remote controller. Send the registered reservation to indoor
unit and then operate.
Step 2 : Select Mode A or Mode B and activate or deactivate WEEKLY TIMER .
Step 3 : Copy and cancel the reservation schedule.
Step 1 : Set reservation schedule to the remote controller. Send the registered reservation
to indoor unit and then operate.
3
4
ƽ
If calendar and clock are not set, the reservation setting for WEEKL
ƽ
lt is possible to select Mode A or Mode B.For each mode ,up to 6 programs can be set per day. ln total, a
maximum of 42 programs can be set for a week for each mode.
Y TIMER cannot be set.
ƽ
If calendar and clock are not set correctly, WEEKLY TIMER will not operate correctly.
ƽ
Reservation for calendar and clock shall be set rst before operating WEEKLY TIMER.
fi
How to set a WEEKLY TIMER.
1. Select Mode A or Mode B.
2. Set a program.
3. Select the desired day of the wekk.
