Hitachi RAC-10JH5, Инструкция по эксплуатации

Страница: 13 / 76

VARIOUS FUNCTIONS
AUTOMATIC OPERATION
AUTO RESTART CONTROL
(AUTO)
(LOW) (SILENT)
Ŗ
If there is a power failure, operation will be automatically restarted when the power is resumed with previous
operation mode and airflow direction.
(As the operation is not stopped by remote controller.)
Ŗ
If you intend not to continue the operation when the power is resumed, switch off the power supply.
When you switch on the circuit breaker, the operation will be automatically restarted with previous operation
mode and air flow direction.
Note: 1. If you do not require Auto Restart Control, please consult your sales agent.
2. Auto Restart Control is not available when Timer or Sleep Timer mode is set.
The device will automatically determine the mode of operation, HEAT or COOL depending on the current room
temperature. The selected mode of operation will change when the room temperature varies.
1
Press the MODE selector button so that the display indicates the
(AUTO) mode of operation.
Ŗ When AUTO has been selected, the device will automatically
determine the mode of operation, HEAT or COOL depending on
the current room temperature.
Ŗ
If the mode automatically selected by the unit is not satisfactory,
manually change the mode setting (HEAT, DEHUMIDIFY, COOL
or FAN).
START
STOP
Press the (START/STOP) button. Operation starts with a beep.
Press the button again to stop operation.
Manual selection
2
3
Set the desired FAN SPEED with the (FAN SPEED) button (the
display indicates the setting).
You can raise or lower the temperature setting as necessary by
maximum of 3°C.
Press the temperature button and the temperature
setting will change by 1°C each time.
Ŗ The preset temperature and the actual room temperature may vary
somewhat depending on conditions.
As the settings are stored in the memory of the remote controller, you
only have to press the (START/STOP) button next time.
H
SI
L
G
N
E
– 13 –