Hitachi RAC-10CZJ, Инструкция по эксплуатации

Страница: 7 / 21

- 7 -
Use the device for cooling when the outdoor temperature is 21-43°C.
If humidity is very high (over 80°C) indoors, some dew may form on the air outlet grille of the indoor unit.
1
3
2
STOP
Press the button so that the display indicates
Set the desired FAN SPEED with the (FAN SPEED) button
(the display indicates the setting).
(AUTO) : The FAN SPEED is HI at fi rst and varies to MED or
LOW automatically when the preset temperature
has been reached.
(HI) : Hi fan speed mode.
(MED) :
(LOW) :
Set the desired room temperature with the TEMPERATURE
button (the display indicates the setting).
˚ C
The range of 25-28°C is recommended as the
room temperature for cooling.
If the temperature setting is 27°C, the room
temperature will be controlled at around 27°C.
The temperature setting and the actual room temperature may
vary somewhat depending on conditions.
■
COOLING OPERATION
( ).
COOLING
Cooling operation starts with a beep.
The cooling function does not start if the temperature setting is
higher than the current room temperature (even though the
(OPERATION) lamp lights). The cooling function will start as
soon as you set the temperature below the current room
temperature.
Medium fan speed mode.
Low fan speed mode.
Press the (STOP) button to stop operation.
As the settings are stored in memory in the remote controller, you only
have to press the (COOLING) button to repeat the same settings next
time.