background image

– 16 –

HOW TO SET THE TIMER

ON/OFF-Timer

The device will turn on (off) and off
(on) at the designated times.

The switching occurs first at the
preset time that comes earlier.

The arrow mark appearing on the
display indicates the sequence of
switching operations.

1

 

Press the        (ON-OFF)

button so that the     (OFF)
mark blinks.

OFF-Timer

You can set the device to turn off
at the present time.

After you change the
batteries;

How to Cancel Reservation

Point the signal window of the remote controller toward the indoor unit, and press the    (CANCEL)
button.
The    (RESERVED) sign goes out with a beep and the    (TIMER) lamp turns off on the indoor unit.

1

 

Set the current month and

day with the TIMER control
button.

1

 

Press the        (OFF-TIMER)

button. The      (OFF) mark blinks
on the display.

1

 

Press the       (ON-TIMER)

button the     (ON) mark blinks
on the display.

2

 

Set the turn-off time

with the TIMER control
button.
Press the    (RESERVE)
button.

3

 

Press the    (ON-

TIMER) button so that the
    (OFF) mark lights and
the   (ON) mark blinks.

 NOTE

You can set only one of the OFF-timer,
ON-timer and ON/OFF-timer.

ON-Timer

Time, Day, Month

The device will turn on
at the designated times.

TIME, DAY,
MONTH
(current time,
day, month)

OFF TIMER

ON TIMER

RESERVE

CANCEL

M

D

M

D

AM

STOP

Start

AM

Start

Stop

PM

Start

Stop

PM

AM

PM

RESET

Содержание RAC-07GH4





































































Отзывы: