– 13 –
RESET
˚
C
˚
C
DEHUMIDIFYING OPERATION
Use the device for dehumidifying when the room temperature is over 16°C.
When it is under 15°C, the dehumidifying function will not work.
■
Dehumidifying Function
When the room temperature is higher than the temperature setting: The device will dehumidify the room,
reducing the room temperature to the preset level.
When the room temperature is lower than the temperature setting: Dehumidifying will be performed at
the temperature setting slightly lower than the current room temperature, regardless of the temperature
setting. The function will stop (the indoor unit will stop emitting air) as soon as the room temperature
becomes lower than the setting temperature.
Set the desired room temperature with the TEMPERATURE
button (the display indicates the setting).
The range of 20-26˚C is recommended as
the room temperature for dehumidifying.
Press the
(START/STOP) button. Dehumidifying operation
starts with a beep. Press the button again to stop operation.
2
■
As the settings are stored in memory in the remote controller, you
only have to press the
(START/STOP) button next time.
START
STOP
Press the FUNCTION selector so that the display indicates
(DEHUMIDIFY).
The FAN SPEED is set at LOW automatically.
The FAN SPEED button does not work.
1
Содержание RAC-07GH4
Страница 36: ... 33 WIRING DIAGRAM MODEL RAS 07 09 14GH4 RAC 07 09 14GH4 RAS 63CHA1 RAC 63CHA1 ...
Страница 38: ... 37 PRINTED WIRING BOARD LOCATION DIAGRAM MODEL RAS 07GH4 09GH4 14GH4 RAC 07GH4 09GH4 14GH4 ...
Страница 68: ...HITACHI PM NO 0000E Printed in Malaysia RAS 07GH4 RAC 07GH4 RAS 09GH4 RAC 09GH4 RAS 14GH4 RAC 14GH4 ...