53
Push the “Ice Maker” button to turn on “Off” indicator lamp.
It stops water supply to the ice tray.
※
When “Off” indicator lamp blinks, wait for about 1 minute for it to turn on, and then follow the next
steps.
Ice tray
Once or twice a year
Open the door of the Ice Compartment,
and take out the ice tray.
Push the level laterally. draw the frame.
Raise the cover (
▲
part ) in the direction of the arrow.
Remove the ice tray from the frame.
Empty the ice tray and wash it lightly in the stream.
Do not use a sponge / cleanser, etc.
Be sure not to scarify.
Open the Ice Compartment, and then attach the
ice tray.
Set the ice tray and
close the cover.
Make the frame horizontal and push it into the end, and
Pull up the lever.
Push the “Ice Maker” button to turn on “Off” indicator lamp.
Automatic Ice Making starts
2
3
4
5
1
●
When the frame for the ice tray cannot be pushed into the back, the motor that drives the ice-tray may have operated. Remove the ice
tray and then push the frame alone into the back, and then push the “Ice Maker” with all the doors opened to turn on “Off” . After a while,
the ice-tray driving motor gets ready, allowing you to mount the ice-tray.
Notice
Ice tray
Cover
Frame
Lever
Click
Click
Is the lever in horizontal
state?
Horizontal
M
ain
te
na
nc
e
(C
on
tin
ue
d)
BB0040171U_R-S42EMSH_C.indd 53
15.6.18 11:07:55 AM
