48
VARIOUS FUNCTIONS
(CONTINUED)
Fine adjustment of the temperature
(Refrigerator Compartment / Freezer Compartment)
Set the condensation prevention heater
(Partitioning iron plates)
Setting the condensation prevention heater to MIN saves energy.
When dew is formed in the partitioning iron plates, set it to the standard.
The temperature settings for the partitioning iron plates can be adjusted by four levels (1 to 4), and level 4 is
the most energy saving.
Open the door of the Lower Freezer Compartment.
Close the door of the Lower Freezer Compartment.
Press down “Freezer” button 3 seconds or more until the preset
sound is heard.
Settings of condensation prevention heater (Energy Saving level) will be changed. Repeat the change of
settings to set the operation sound you like (see the table shown below).
1
3
2
Partitioning iron plates
Temperature settings for Refrigerator and Freezer Compartments can be more finely adjusted by 11 levels.
Open the door of the Lower Freezer Compartment.
Close the door of the Lower Freezer Compartment.
Follow the operations shown in Step 1, 2 and 3.
2 beeps sound and you can set the temperature by normal step.
Press down “Fridge” button for 5 seconds or more until 1 beep
is heard.
Push “Fridge” or “Freezer” button to make an adjustment.
The temperature becomes higher by 1 level every time you push the button. (Pushing “MAX and more” returns to “MIN and under”.)
(
Lighting Blinking Turned off)
1
4
3
To c
an
cel
2
●
The setting will be cancelled when the power plug is connected and disconnected or power failure recovery takes place.
Notice
MIN setting of the heater
Standard
MIN setting level 1 MIN setting level 2 MIN setting level 3 MIN setting level 4
Standard
Preset sound
2 beeps
Long beep
Long beep (2 beeps) Long beep (3 beeps) Long beep (4 beeps)
2 beeps
(Factory setting)
Indication
lamp
Setting
MIN and
under
MIN
MID.
MAX
MAX and
more
BB0040171U_R-S42EMSH_C.indd 48
15.6.18 11:07:51 AM
