Hitachi R-S42CMJ, Как пользоваться инструкцией

Страница: 50 / 60

50
HOW TO MAINTAIN THE AUTOMATIC ICE MAKER
1
Push the
ყϕ
button and hold it for more than 5 seconds
after closing all the doors and turning on the display.
When the three indicator lamps
ݨఀყϕ
(Quick Ice Making) ,
ყϕ
(Ice Making) and 停止 (Stop) start to blink and alarm
starts to sound, stop holding the button.
ყϕጠ଼ᇓ
(Ice Maker
Cleaning) starts.
Lay a soft clean towel on the bottom of the ice case.
This is to suck water drained from Ice Maker Cleaning,
preventing it from spilling out of a cutout located behind in
the Ice Maker case.
About three minutes later, when alarm and blinking
end, remove water in the ice case using the towel.
There is no problem with using water remaining in
the water supply container, if any.
・
The indicator lamp will fl ash and the buzzer will sound for about 3
minutes.
・
ყϕጠ଼ᇓ
(Ice Maker Cleaning) can’t be interrupted.
・
If you open any of the refrigerator doors during Ice Maker
Cleaning, the cleaning may not work properly. Do not open or
close the door until cleaning is completed.
・ Door alarm sounds even if alarm is disabled. Pg.57
2
3
About
5 seconds
1 beep
4 long beeps
To prevent malfunction, lay the
towel so that its thickness does
not reach this line.
■ Do not put your hand in the
mechanical part of the Automatic
ice maker.
œ
You may be injured when the Ice tray
turns.
Ice Compartment
Press this button for
more than 5 seconds
Water supply
container
Ice tray
Ice tray and water supply line can be washed.
Be sure to check the followings before starting the operation.
Washing the supply channel (Ice Maker Cleaning)
●
Water supply container
・ Water is fi lled in it.
・ The container is set properly
as specifi ed.
● Ice case
・ If there remains ice,
remove it.
Go to the next step after checking them.
Before removing
the case, wipe
off the water in
the case.
When using for the fi rst time / When not used for more than one week
Warning