Hitachi R-E5000H, Как пользоваться инструкцией

Страница: 55 / 68

55
V
ar
io
us
F
un
ct
io
ns
Setting the partition iron plate
●
The setting will be returned to the standard when the power plug is disconnected and connected or power failure recovery takes place.
Notice
Set the condensation prevention heater to MIN.
(Partitioning iron plates)
Setting the condensation prevention heater to MIN saves energy.
When dew is formed in the partitioning iron plates, set it to the standard.
The temperature settings for the partitioning iron plates can be adjusted by four levels (1 to 4), and level 4 is
the most energy saving.
MIN setting of the heater
Standard MIN setting level 1 MIN setting level 2 MIN setting level 3 MIN setting level 4 Standard
Preset sound −
Long beep Long beep (2 beeps) Long beep (3 beeps) Long beep (4 beeps) 2 beeps
(Factory setting)
Door Alarm and volume adjustment of the operation sound
Touch button on the Control Panel to turn
on the indicator lamp.
All indicator lamps turn on, and then the current settings are displayed.
Press down button for 3 seconds or more
until the preset sound is heard.
The volume level of the operation sound is changed from “Standard” to “Louder”
or “Sound off” . Repeat the change of settings to set the operation sound you like
(see the table shown below). The sound is set to “Standard” before shipping.
1
2
●
It is impossible to adjust the volume level of
either door alarm or operation sound only.
●
When the Door Alarm is disabled, characters
on the Control Panel no longer blink.
●
Even if the volume level is set to “Sound off”,
the alarm of the Ice Maker Cleaning and the
operation sound when the AUTO DOOR of
the Refrigerator Compartment and the AUTO
DOOR are set to
“ON”
will sound.
●
When connecting/disconnecting the power
plug or after recovering from electric power
failure, it will return to the standard setting
where the Door Alarm sounds.
Notice
You can set the sound level of the alarm louder or no alarm sound.
Door Alarm
When the door is opened for more than 1 minute, sound and light occur indicating the door is open as shown in the table below.
No Door Alarm is installed in the Upper Freezer.
※
When the door is left open for one minute or more, the indicator lamp blinks and the characters on the Control Panel is illuminated.
※
From 30 seconds onwards with the door opened, the Door Alarm sounds only when the energy saving mode is set. (The indicator lamp blinks when
the door is left open for one minute or more)
※
When the indicator lamp on the display area blinks due to the Door Alarm function, the Control Panel will not be activated by touching it.
Duration when door is open 1 minute 2 minutes 3 minutes
Alarm sound Long beep (3 beeps) Long beep (5 beeps) Long beep (continuously), Louder
Volume level
Standard Louder Sound off Standard
Preset sound −
2 long beeps Long beep 2 beeps
(Factory setting)
Partitioning iron plates
Open the door of the Lower Freezer
Compartment.
Touch button on the Control
Panel to turn on the indicator lamp.
All indicator lamps turn on, and then the current settings are
displayed.
Close the door of the Lower Freezer
Compartment.
Press down button 3 seconds or
more until the preset sound is heard.
The setting of MIN level of the dew condensation prevention
heater will be switched.
Repeat the above-stated operation to set it to the level you
prefer (see the table above).
1
2
4
3
BB0040171T_R-E5000SHV_A.indd 55 15.4.7 1:50:39 PM