41
Functions of the Control Panel
The Control Panel is a touch panel made of glass.
If you touch
button, the current settings will be displayed.
The upper portion of the Control Panel is the display and the lower portion is for operation.
Touch the lower portion of the Control Panel to change the settings, if necessary.
Le
ar
n N
am
e &
F
un
ct
io
n o
f E
ac
h P
ar
t
Providing information
Setting Energy Saving mode
Adjusting temperature settings
Setting an ice-making Setting a cooling mode Setting the Vacuum Compartment
D
is
pla
y a
re
a
Fo
r o
pe
ra
tio
n
Wa
ter
It will be illuminated automatically to show that energy saving mode including
Frost Recycle Cooling and others is set to ON when it is operating under the low
power consumption.
It will turn on while the Control Panel is locked.
Pg.54
Blink indicating any trouble.
Pg.64
It will turn on when water in the water supply container is getting low.
Pg.51
Set Energy Saving mode.
Energy-saving by reducing
cooling power of each
compartment.
Set temperature for each
compartment.
Normally, use the “
■■
”
setting.
Set the ice making
mode
Set a cooling mode
Set the Vacuum
Compartment mode.
“Trip”
Pg.54
“Save”
Pg.54
Refrigerator
Compartment
Pg.45
Freezer Compartment
Pg.49
“Quick”
Pg.51
“On”
Pg.50
“Off”
Pg.51
“Fridge”
Pg.45
“Freezer”
Pg.49
“Veg”
Pg.53
-1˚C
Pg.47
+1˚C
Pg.47
All lamps off
Pg.47
First touch it.
※
All the indicator lamps are lit for the sake of explanation.
・
Immediately after installation or when plentiful foods are stored at a time
・
When the door is opened/closed frequently or the door is not closed completely
・
It is set to
“Freezer”
,
“Fridge”
,
“Quick”
, or
“Veg”
.
・
When the ambient temperature around the refrigerator is about 35˚C or higher.
If it is not illuminated, it may be due to the following reason.
Notice
■
About the display
●
Close all the doors before adjusting the settings. While a door of the refrigerator is opened or an indicator lamp on the display is blinking, it will not
work even if you touch the Control Panel.
●
If you confirm the setting, touch
button or open the refrigerator door. The display will be lit again.
●
If you touch
button again after finishing the operation, it will be unlit. The displayed characters will be unlit 40 seconds later without touching
the
button again for energy-saving. However, the setting of
“Energy Saving”
mode,
“Fridge”
,
“Freezer”
and
“Quick”
indicator lamps and
“Off”
and
“Water”
indicators and [
“
eco” operation indicator lamp] will not be unlit.
●
When opening the refrigerator door and the displayed characters are lit, they become unlit about 15 seconds after closing it.
■
About the Control Panel
●
Response of the touch panel may change depending on the surrounding temperature, humidity, physical condition of the user or operation status of
the adjoining electric product.
●
Release a finger and touch the panel again if the panel does not respond after touching it. False detection may occur (it may be kept pressed) if the
time interval between key touches is too short. Response of the touch panel does not improve even if you touch it strongly.
●
The panel may not respond if it is wet or dirty. Wipe it off with a dry cloth.
Notice
BB0040171T_R-E5000SHV_A.indd 41
15.4.7 1:50:04 PM
