How to Use
14
(b),(c)
(2) Each displayed items
[View by: Accum. Data]
Default display items are Thermo on time and refrigerant flow amount (IU) only.
To add displayed items, click [Change] button.
(a) Day and Time
Specify the day and time.
This item can not be hidden by [Change] button.
This item will be printed on each printed document.
(b) Name
Name of each unit identifier.
If "Unit" is selected in [View by], (c) will be displayed in this column.
This item can not be hidden by [Change] button.
This item will be printed on each printed document.
(c) H-LINK No. Cycle, Address, Volt meter No. (IU), Volt meter No. (OU) and Gas meter.
H-LINK No. Cycle, and Address to identify each unit, and volt meter No. and Gas meter No. connected to the
unit are shown in this column.
If other than "Unit" is selected in [View by], (b) will be shown in this column.
This item can not be hidden by [Change] button.
Volt meter No. (IU), Volt meter No. (OU) and Gas meter No will be described by a combination of
H-LINK – Station Address – INPUT No., each lotted by hyphen.
Gas meter No. will not be shown if no GHP is connected. (The item can not be shown by [Change] button.)
This item will be printed on each printed document.
(d) AC Run
Operation status of the Unit (Accum. data)
(e) Thermal Storage Operation
Thermal storage operation status (Accum.data)
This item will not be shown if no Thermal unit is connected. (The item can be shown by [Change] button.)
(a)
(d)
(e)
