-3-
4. Disassembly of the front base and rear base
• Turn Knob (A)
[25]
, Lock Nut M10
[26]
, and
Knob (B)
[27]
counterclockwise to remove the
Front Base
[24]
. Secure Knob (B)
[27]
in place
and then pull up Knob (A)
[25]
to remove it.
Remove the four Tapping Screws (W/Flange)
D4 x 16 (Black)
[69]
on the Housing Ass’y
[59]
to remove the Rear Base
[68]
.
5. Disassembly of the cutter block ass’y from the end bracket
• Set the Cutter Block Ass’y
[1][18]
in a vice (and be careful to avoid damage), remove Pulley (B)
[41]
,
and then strike the front edge of the spindle of the Cutter Block Ass’y
[1][18]
to remove the Cutter Block
Ass’y
[1][18]
.