manualshive.com logo in svg

Hitachi NV 75AG, Технические данные и руководство по обслуживанию, Страница: 4 / 45

Поделиться
Скачать
Hitachi NV 75AG Скачать руководство пользователя страница 4

--- 1 ---

1. PRODUCT NAME

Hitachi 75 mm (3") Coil Nailer, Model NV 75AG

2. MARKETING OBJECTIVE

Nails 75 mm (3") long are most popularly used for framing work in the U.S.A.  Although our current coil nailer

Model NV 83A is capable of driving nails 83 mm (3-1/4") long maximum, it is heavy in weight (3.5 kg (7.7 lbs.)).

C is also heavy in weight (3.6 kg (7.9 lbs.)) even though it is capable of driving nails 70 mm (2-3/4") long

maximum.  The newly developed 75 mm (3") coil nailer Model NV 75AG is ultra-lightweight (2.5 kg (5.5 lbs.)) and

features the following:

"Pop-out magazine" allows easy nail loading from the top of the magazine because the nail holder can be

tilted.

Driving depth is adjustable without tool.  The driving section is simplified because the depth adjuster is located

near the trigger.  The tip of the nose is easy to see and operate.

The exhaust air outlet is 360˚ adjustable without tool.

Capable of driving either wire-collated or sheet-collated nails.

There is a demand for a high-power nailer capable of driving larger-diameter nails from the users of the Model

NV 65AH.  The new Model NV 75AG can also satisfy the above demand.  Please expand the sales of the new

Model NV 75AG.

3. APPLICATIONS

Floor and wall framing

Siding, fencing, decking

Wall and roof sheathing

Mobile home and modular housing construction

Crate and pallet construction

Note: The nails of 3.3 mm (.131") dia. x 75 mm (3") length may not be driven reliably into some materials.

          Salespersons should instruct the customers to perform a driving test before actual use.

4. SELLING POINTS

Capable of driven both
wire-collated and
sheet-collated nails

360˚ adjustable exhaust

Easy top load
pop-out magazine

Grip rubber

Tool-less depth
adjustment

Lightweight: 2.5 kg (5.5 lbs.)

Содержание NV 75AG














































Отзывы:

Нет отзывов