-21-
[Tools required]
•
Socket wrench (14 mm)
•
Flat-blade screwdriver
(1) Disassembly
•
Remove the Valve Bushing
[26]
(left-handed thread) by using the socket wrench (14 mm). You can detach
the Plunger
[30]
and Knob
[24]
together. You can also detach the Spring
[32]
and Valve Packing
[33]
.
•
After removing the Knob
[24]
, Retaining Ring (E-Type) For D4 Shaft
[25]
from the Plunger
[30]
, you can
detach the Plunger
[30]
from the Valve Bushing
[26]
.
(2) Reassembly
Conduct reassembly by reversing the disassembly procedure, but note the following:
•
Fully apply grease to the respective O-rings.
•
Mount the Retaining Ring (E-Type) For D4 Shaft
[25]
on the Plunger
[30]
and then push the Knob
[24]
straight in until it contacts the Retaining Ring (E-Type) For D4 Shaft
[25]
.
Exhaust Cover
[7]
Knob
[24]
O-Ring (1AP-3)
[29]
O-Ring (S3)
[28]
O-Ring (S-10)
[27]
Spring
[32]
Plunger
[30]
Plunger O-Ring
[31]
Valve Bushing
[26]
(left-handed thread)
Retaining Ring (E-Type) For D4 Shaft
[25]
Valve Packing
[33]
Disassembly and Reassembly of the Air Duster Valve Section
