manualshive.com logo in svg

Hitachi NR 90AE (S), Технические данные и руководство по обслуживанию, Страница: 21 / 42

Поделиться
Скачать
Hitachi NR 90AE (S) Скачать руководство пользователя страница 21

--- 18 ---

The upper O-ring (P-7) 

[64]

 of the Valve

Piston  

[65]

 is abnormal (worn, broken or

flawed).

The Feed Piston O-ring (I.D. 14) 

[61]

 of

Valve Bushing (B) 

[62]

 is abnormal (broken

or flawed).

The internal surface   f  of the valve cavity

of the Body Ass'y 

[24]

 is abnormal.

The O-ring (1AP-10) 

[66]

 of the Valve

Piston 

[65]

 is abnormal (worn, broken or

flawed).

The lower O-ring (P-7) 

[64]

 of the Valve

Piston 

[65]

 is abnormal (worn, broken or

flawed).

The O-ring (P-18) 

[63]

 of Valve Bushing (B)

[62]

 is abnormal (broken or flawed).

The internal surface  e  of the valve cavity

of the Body Ass'y 

[24]

 is abnormal.

C) Nose 1

The O-ring (I.D 94.6) 

[18]

 of the Cylinder

Plate 

[17]

 or the O-ring (I.D. 59.6) 

[16]

 of

the Cylinder 

[15]

 is abnormal (broken or

flawed).

Air leakage point

Possible cause

With control valve OFF

With control valve ON

The O-ring (I.D 60) 

[31]

 of the Nose 

[28]

 or

the groove is abnormal (broken or flawed).

The Nylock Hex. Socket Hd. Bolt M8 x 30

[29]

 is loose.

The Piston Bumper 

[30]

 is abnormal

(portion  d  is damaged, deformed or

cracked).

The Piston 

[13]

 is abnormal (driver blade is

deformed or seal surface is deformed).

The lower O-ring (I.D. 1.8) 

[68]

 of the

Plunger 

[69]

 is abnormal (worn, broken or

flawed).

Valve Bushing (A) 

[70]

 is abnormal (sliding

surface of the Plunger 

[69]

 is deformed or

flawed).

The upper O-ring (I.D 1.8) 

[68]

 of the

Plunger 

[69]

 is abnormal (worn, broken or

flowed).

The Valve Piston 

[65]

 is abnormal (sliding

surface of the Plunger 

[69]

 is deformed or

flawed).

D) Nose 2

E) 

Control Valve 1

F) 

Control Valve 2

Gasket (B) 

[39]

 is damaged.

The Hex. Socket Hd. Bolt M5 x 16 

[41]

 is loose.

Seal surface of the Body Ass'y 

[24]

 or the Cap 

[40]

 is abnormal (damaged, deformed or

flawed).

G) Cap

Содержание NR 90AE (S)











































Отзывы:

Нет отзывов