3
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency ener
-
gy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
• To comply with FCC RF exposure compliance requirements, a
separation distance of at least 8 inches must be maintained be-
tween the Camera unit of this device and all persons.
• This product’s transmitter must not be co-located or operated in
conjunction with any other antenna or transmitter.
• Changes or modifications not expressly approved by the party
responsible for compliance with the FCC Rules could void the
user’s authority to operate this product.
Power source
This product is designed to operate on 120 volts 60 Hz, AC current.
Insert the power cord into a 120 volts 60 Hz outlet. To prevent electric
shock, do not use the product’s (AC) plug with an extension cord,
receptacle, or other outlet. Never connect the product to 50 Hz, direct
current, or anything other than the specified voltage. The main power
cord is the product’s disconnect and must remain readily operable and
accessible.
WARNING:
CAUTION:
E
N
G
L
IS
H
