Hitachi L26A01A Скачать руководство пользователя | Manualshive

Страница: 4 / 49

background image

2

INSTRUCTIONS

Thank you for purchasing the HITACHI LCD Television. We hope that you will enjoy the great performance with this product.
This LCD Television has been designed to meet the International standards. However, it could cause personal injuries and
property damage if improperly handled. In order to prevent potential danger and obtain maximum benefit from your set,
please observe the following instructions when installing, operating, and cleaning the product.
Keep this manual for future reference, and record the serial number of your set in the space provided on the front cover page
of this manual.

About This Manual

●

The information in this manual is subject to change without notice.

●

This manual has been created with extra care. In case that you have any comments or questions regarding this manual,

please contact your local dealer or our Customer Service Center.

●

Before operating this set, please fully understand the prerequisite such as specifications or constraints of the hardware

and software. We are not responsible and have no liability for any loss, damage or injury as a result of misuse.

●

Reproduction, copying, use, modification, and/or transmission in whole or in part of this manual are prohibited without any

prior written permission.

●

All other products and company names used in this manual are trademarks or registered trademarks of their respective
owners.

●

The information in the manual included following models,
For 26 inch, L26A01A including L26A01A NA and L26A01A CO
For 32 inch, L32A01A including L32A01A NA and L32A01A CO
For 37 inch, L37A01A including L37A01A NA and L37A01A CO

Trademark Credits

●

VGA and XGA are trademarks of International Business Machines Corporation.

●

VESA is a registered trademark of the Video Electronics Standard Association.

●

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing

LLC.

Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.

About Software

You may not alter, decompile, disassemble, decrypt, or otherwise reverse- engineer the Software installed in this product,
which are prohibited by law.

Features

●

Large-screen and high-definition LCD panel.

●

Enjoy high resolution display with 1366 (H) x 768 (V) pixels.

●

Improved Digital signal processor.

●

High quality sound with deeper, richer and dynamic bass tones.

●

Accept more digital input devices with HDMI terminal.

●

Great diversity of connecting terminals to cover wide range of audio-visual equipment.

●

Enjoy the image from PC with large, high-definition LCD screen.

●

Easy-to-use On-Screen Display system operating with remote control.

●

Low power consumption with power saving feature.

●

Swivel feature. (For L32A01A, L37A01A)

«
...
2
3
4
5
6
...
»

Содержание L26A01A


















































Отзывы:

Нет отзывов

Похожие инструкции для L26A01A

Бренд: Vizio Страницы: 46

SENTRY 2 SY2551

Бренд: Zenith Страницы: 22

Бренд: Hisense Страницы: 42

Бренд: Teac Страницы: 53

Бренд: Palsonic Страницы: 26

Бренд: SONIQ Страницы: 22

Бренд: QFX Страницы: 64

Бренд: Finlux Страницы: 91

Бренд: Telefunken Страницы: 57

Бренд: AWA Страницы: 29

Бренд: RCA Страницы: 34

Бренд: HANNspree Страницы: 63

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 24

Бренд: Samsung Страницы: 24

AA59-00411A - Original Remote Control

Бренд: Samsung Страницы: 36

Бренд: Samsung Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды