LCD TV and Operating Buttons
FRONT and REAR VIEW
Control buttons VIEW
Control Buttons
P\V-AV
1.
Standby Off/On button
2.
TV/AV button
3.
Programme Up/Down buttons-
Volume Up/Down buttons
Note
:You can use +/- buttons
to change volume. If you want
to change channels, press P/V/
AV button once and then use
+/- buttons. If you hold the P/V/
AV button about a few seconds,
source OSD will be displayed.
Main menu OSD cannot be
displayed via control buttons.
Viewing the Back side Connections
HDMI
1
SPDIF
Coax.OUT
HDMI 1: HDMI Input
1.
HDMI Input
are for connecting a device that has an
HDMI
socket. Your LCD TV is capable of
displaying High Defi nition pictures from devices such as a High Defi nition Satellite Receiver or DVD
Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets
can accept either 720p or 1080p signals. No sound connection is needed for an HDMI to HDMI
connection.
RF Input
2.
connects to an aerial antenna system.
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device
to the television with an appropriate antenna cable, as shown in the illustration in the following pages.
SCART
3.
input or output for external devices. Connect the SCART cable between SCART socket on TV and
SCART socket on your external device (such as a decoder, a VCR or a DVD player).
Note:
If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.
Note
: S-VHS signal is supported via the scart socket.
PC Input
4.
is for connecting a personal computer to the TV set.
Connect the PC cable between the
PC INPUT
on the TV and the PC output on your PC.
S/PDIF Coaxial Out
5.
outputs digital audio signals of the currently watched source.
Use an
SPDIF coaxial cable
to trasfer audio signals to a device that has S/PDIF input (not supplied).
