Hitachi KP-FM200WCL, Руководство по эксплуатации

Страница: 41 / 43

33
Specifications of KP-FM200WCL and KP-FMR200WCL are showing.
KP-FM200WCL KP-FMR200WCL
1) Imaging device 2/3-inch global shutter method CMOS
Effective pixels 2048 (H) x 1088 (V)
Pixel size 5.5 μ m (H) x 5.5 μ m (V)
Color filter None RGB primary color mosaic filter
2) Image area 11.264mm (H) x 5.984mm (V)
3) Scanning system Progressive scan
4) Frame rate MAX280 frame per second (full pixel readout)
5) Pixel frequency 40.000MHz
6) Horizontal
scanning frequency Full configuration(80MHz) : 310.078kHz
scanning frequency Full configuration(40MHz) : 155.039kHz
Medium configuration(80MHz) : 155.039kHz
Medium configuration(40MHz) : 77.519kHz
Base configuration(80MHz) : 77.519kHz
Base configuration(40MHz) : 38.759kHz
8) Vertical scanning
frequency Full configuration(80MHz) : 281.889Hz
(full pixel readout) Full configuration(40MHz) : 141.588Hz
Medium configuration(80MHz) : 141.588Hz
Medium configuration(40MHz) : 70.956Hz
Base configuration(80MHz) : 70.956Hz
Base configuration(40MHz) : 35.519Hz
9) Synchronization Internal
10) Lens mount C mount
11) Frange back 17.526mm (no adjustment)
12 ） Optical filter Dummy glass (AR coated) IR cut filter
13) Video output Digital output (CameraLink)
Base configuration 2TAP (80Hz or 40MHz)
Medium configuration 4TAP (80Hz or 40MHz)
Full configuration 8TAP (80Hz or 40MHz)
Output image size 2048 (H) x 1088 (V) (full pixel readout)
15) Resolution Horizontal / Vertical ： 1000TV lines Horizontal / Vertical ： 700TV lines
16) Sensitivity 400 lx
、
F5.6
、
3200K 2000 lx
、
F11
、
3200K
18) S/N 48dB
19) Electronic shutter
Preset OFF,1/71,1/100,1/250,1/500,1/1000,1/2000,1/10000,1/50000 second
Variable 16.125 μ s
～
211367 μ s
20) Gamma γ =1
21) Frame on demand
Mode OFF (Normal mode), Fixed shutter mode, ONE trigger, Burst trigger
Trigger input From CameraLink (CC1) or DCIN/SYNC connector
22) Partial scan Selectable start position and width of picture grabbing in 1H step (max 8 areas)
25) Remote control
Control system Start-stop synchronization system
Control items TRIGGER 、 SHUTTER 、 ACCEL 、 DATA BIT 、 CONFIG 、 CLK 、 FLIP 、 TEST
PATTERN 12pinOUT
、
GAIN
、
BLACK LEVEL
、
PARTIAL SCAN
、
FACTORY SETTING
26) Power supply DC12V±1V
27) Power consumption Approx. 230mA (Approx. 2.76W)
28) Ambient temperature
Performance 0 ℃ to +40 ℃ (+32 to +104F) / less than RH 90 ％
Operating -10 ℃ to +50 ℃ (+14 to +122F) / less than RH 70 ％
Storage -20 ℃ to +60 ℃ (-4 to +140F) / less than RH 70 ％ (without dew
condensation)
29) Vibration endurance 10 to 55Hz (2.37 to 71.7 m/s
2
), sweep: 1 minutes, XYZ, 30minutes
30) Shock endurance 490.3m/ s
2
(vertical, horizontal, once each faze)
31) Dimensions 44(W) x 44(H) x 41(D) mm
32) Mass Approx. 130g
33) Standard compositions Camera, Composition table
Specifications