Hitachi HF-W7500 Скачать руководство пользователя страница 254

Страница: 254 / 319

8. MAINTENANCE OPERATIONS

8-19

8.4.4 RAS information display command (getrasinfo)

<Name>

getrasinfo - Displays the status of the equipment such as the status of the fan and the

temperature inside the chassis as well as the configuration information of the RAS software

getrasinfo [/status | /setting] [/e file name]

The getrasinfo command displays the status of the equipment such as the status of the fan and

the temperature inside the chassis as well as the configuration information of the RAS software

at the command prompt. This command can also store the output in the specified file in the text

format.

The following options are available for this command. If neither the /status nor the /setting

option is used, the command displays both the information about the equipment and the settings

of the RAS software.

/status: Displays the status of the current equipment including the status of the fan and the

temperature inside the chassis.

/setting: The command displays the configuration information of the RAS software.

/e File name: The output is not displayed at the command prompt but instead stored in the

file specified by the file name in the text format.

Table 8-8 shows the information displayed by the getrasinfo command.

Table 8-8 Information Displayed by the getrasinfo Command

Item

Description

Status of the equipment

• Fan status

• Temperature status

• RAID status

• Drive status

• Memory status

RAS software settings

• Automatic shutdown setting

• Watchdog timer setting

• Self-Monitoring, Analysis and Reporting

Technology (SMART) setting

• Drive power-on hours monitoring setting

• Digital LEDs for Status indication setting

• Pop-up display setting

Содержание HF-W7500
































































































































































































































































































































Результаты поиска

Содержание HF-W7500

Отзывы:

Похожие инструкции для HF-W7500

Бренды по названию

Популярные бренды

Hitachi HF-W7500, Инструкция по эксплуатации

Результаты поиска

Содержание HF-W7500

Отзывы:

Похожие инструкции для HF-W7500

Бренды по названию

Популярные бренды