146
【
Error Message
】
No.
Error messages
Actions to be taken
1
parameter error
Input command syntax error
Confirm command syntax.
another F/W update process is
running.
Other process is executing FLASH-ROM
update, backup or Onine-update.
Confirm whether other FLASH-ROM update, backup commands or FW online
update command has finished and retry command.
2
xxx : ioctl(xxx) error.(xxx)
xxx : ioctl_diag(xxx) error.(xxx)
ioctl error
Wait for a while and retry command.
If the same error is displayed when executing command again, please contact
maintenance personel or support service.
3
xxx: flash read error (xxx)
FLASH read error
Wait for a while and retry command.
If the same error is displayed when executing command again, please contact
maintenance personel or support service.
4
adapter status error.
Online update is not applicable to the
adapter.
Confirm the adapter status. Adapter status may be the following.
- H/W in the specified Core is MCK, F-STOP or CHK-STOP status.
- Operational status of FW in the specified Core is not Normal.
- The specified adapter is isolated.
5
already update.
F/W has already been updated.
The adapter is already operating on the FW version stored in FLASH-ROM.
Check FLASH-ROM version and FW version currently operating on the HW
reffering the section ‘Online update of the firmware’ .
6
update proccess is reserved.
F/W has already been reserved for online
update.
(Waiting for FW to be idle state)
Check FLASH-ROM version and FW version currently operating on the HW
reffering the section ‘Online update of the firmware’ .
7
unsupport F/W error.
This FW is not covered by online update.
Reboot the server for FLASH-ROM to take effect.
8
inapplicable – FW error.
Inapplicable – HW error.
This FW is not covered by online update.
Reboot the server for FLASH-ROM to take effect.
9
adapter busy error try again later.
other port(s) busy.(xxx)
Please execute it again after
waiting for the end of other HBA
tools.
Adapter is busy.
Wait for a while and retry command.
If the same error is displayed when executing command again, please contact
maintenance personel or support service.
10
xxx is unsupport for FPP.
This HW is not covered by online update
Reboot the server for FLASH-ROM to take effect.
11
not found update file
Failed to find update file.
Confirm the update fil nane and file path.
12
update file read error.
update file access error.
update file open error.
Failed to access update file.
Confirm the attributes of update file.
13
Update file size error.
Update file size is not correct.
Specified update file size is not correct. Confirm whether the update file is
transferred using binary mode.
Содержание GGX-CC9M4G2X1
Страница 151: ...130 ...
Страница 157: ...136 Example ...