78
The detail of the ‘Status(Flash -> Current)’ is as follows.
*1) Retry the command to recover the possible temporary error.
For error messages when executing command, refer to [Error message] in the section
‘hfcmcref-Online update of the firmware’.
‘Update-Status’
Meaning
Applicable
Firmware online update is applicable.
No need
Hitachi Gigabit Fibre Channel Adapter hardware has already
updated by this version of the update file. You do not need to
execute online update.
Waiting
Firmware update operation is running now. You are now
waiting to complete the operation. If the hfcmgr command
version lower than 8.0 is used, or an Adapter except 16G
Adapter is used, this message will be displayed.
Waiting(w---)
Firmware update operation is running now and waiting for its
completion.
If the hfcmgr command version higher than or equal to 8.0
and the 16G Adapter are used, this message will be
displayed.
NG(Unsupported)
The firmware does not support firmware online update
function. You have to transfer the FLASH-ROM data by off-
line.
NG(Inapplicable - FW)
Specified firmware includes the update information which is
not applicable by on-line. You have to transfer the FLASH-
ROM data by off-line.
NG(Inapplicable - HW)
Specified firmware includes the hardware setting which is not
applicable by on-line. You have to transfer the FLASH-ROM
data by off-line.
NG(ioctl error) *1)
Error occurred when executing ioctl.
NG(flash read error) *1) Error occurred when reading FLASH-ROM.
NG(Unsupported HBA) This Gigabit Fibre Channel boaord does not support firmware
online update function. You have to transfer the FLASH-
ROM data by off-line.
NG(Device Busy) *1)
Failed to open device file.
Содержание GGX-CC9M4G2X1
Страница 151: ...130 ...
Страница 157: ...136 Example ...