Hitachi G 12SA3, Технические данные и руководство по обслуживанию

Страница: 12 / 26

--- 9 ---
(5) Removal of the Slide Knob [36] <42>
1. Loosen the two Tapping Screws (W/Flange) D4 x 45 [51] <57> and remove the Tail Cover [53] <59> .
2. Hold the Housing [37] <43> and raise the Slide Bar [41] <47> until the Slide Knob [36] <42> moves to the
"ON" position.
3. Check that the Slide Knob [36] <42> has not moved to the "ON-LOCK" position, and push down the Slide
Knob [36] <42> until it clicks while keeping the Slide Bar [41] <47> raised.
4. Raise the Slide Knob [36] <42> straight up and remove it keeping the Slide Bar [41] <47> raised.
(6) Removal of the Pushing Button Switch [39] <45>
1. Loosen the two Tapping Screws (W/Flange) D4 x 45 [51] <57> and remove the Tail Cover [53] <59> .
2. Turn the Switch Holder [45] <51> for the Housing [37] <43> in the arrow "A" direction and remove the Switch
Holder [45] <51> from the Houisng [37] <43> . (See Fig. 7.)
3. Pressing the Pushing Button Switch [39] <45> in the arrow "A" direction, press the latches of the Switch Holder
[45] <51> in the arrow "B" direction with a small flat-blade screwdriver to remove the Pushing Button Switch
[39] <45> from the Switch Holder [45] <51> . (See Fig. 8.)
Fig. 7
Fig. 8
Housing
Switch holder
A
A
Switch holder
Switch
Latches