-14-
Q1E-EP0348
Manual Cleaning:
Prepare the detergent solution in a tank with cold water (please follow
the instructions of the detergent manufacturer regarding application,
dilution and contact time).
1)
The temperature of the detergent solution should be between 15-30 °C,
concentration is 1.6%. Please note the minimum contact time of the
detergent in the manufacturer’s instruction. If a differing
detergent is used, please also note the approved material
compatibility for the medical device.
2)
Immerse the immersible part of the probe without connector into
the diluted detergent solution (see Fig. 5). Wipe the immersible
part of the probe under the surface of the detergent solution with
a soft cloth to remove all visible soil. Be sure that all grooves
of the probe are implemented during the cleaning process.
3)
The immersible part of the probe should be left in the detergent
solution according to the specified contact time of the detergent
manufacturer.
4)
Wipe the un-immergible parts of the probe with a soft cloth dipped
with the detergent solution.
5)
Rinse the probe with running tap water for 1 minute. (alternatively:
immerse the immersible part of the probe in a tray filled with
deionized water/tap water (see Fig. 5) for 5 min.)
6)
Visually check the outer surface of the probe for cleanness. If
necessary, use magnifying glass for visually check. If there is
still soil visible, repeat all above steps.
Содержание EUP-L52
Страница 29: ... 23 Q1E EP0348 2200 108 5 27 87 60 150 65 Unit mm Fig 9 Dimension Diagram of Probe EUP L53 ...
Страница 30: ... 24 Q1E EP0348 60 150 65 2200 109 108 23 Fig 10 Dimension Diagram of Probe EUP L53L Unit mm ...
Страница 31: ... 25 Q1E EP0348 65 26 46 102 2200 60 150 Unit mm Fig 11 Dimension Diagram of Probes EUP L53S and EUP L52 E ...
