background image

3 - 19

6.5

White Balance Adjustment

Phenomenon due to incomplete adjustment:

The original color of subject is different from that of output image.
White subject is not seen as white.

Status during adjustment:

Attach a C12 light balancing filter.
Set the zoom to wide end, and point at a grayscale chart.

Procedure:

1) Input 4 or 5 to PC on the camera adjustment menu screen. (*1)
2) The R-B offset screen will appear: Input the 2-digit R-B offset code,

referring to Table 6-3, and then press the Enter key.

3) The Mg-G offset screen will appear: Input the 2-digit R-B offset code,

referring to Table 6-3, and then press the Enter key.

4) Follow the instructions on PC display thereafter. (The adjustment will be

complete when the camera adjustment menu screen is restored.)

*1: The number to be input will differ depending on the model (B matrix

adjustment necessary or not): Input the number, following the camera
adjustment menu screen that appears on actual PC display.

Model

DZ-MV230A/MV230A(K)
DZ-MV200A/MV200A(K)
DZ-MV238E(AU)/MV238E(SW)
DZ-MV230E/MV230E(UK)
DZ-MV208E(AU)/MV208E(SW)
DZ-MV200E/MV200E(UK)

Table 6-3 R-B/Mg-G Offset Codes

Camera adjustment menu screen

Mg-G offset code

0 (zero) 0 (zero)

1B

0 (zero) 0 (zero)
0 (zero) 0 (zero)

1F
1F

R-B offset code

0 (zero) A

12

0 (zero) A
0 (zero) A
0 (zero) E
0 (zero) E

Input 4 or 5 to PC (*1)

***********************************************************

CAMERA ADJUSTMENT

***********************************************************

[1]

SAMPLING PULSE

[2]

AUTO IRIS CONTROL

[3]

SHUTTER 

[4]

B MATRIX

[5]

WHITE BALANCE

[6]

CHROMA GAIN

[ESC] RETURN TO MAIN MENU

Please select [1] - [6] or [ESC]

R-B offset screen

Input the corresponding 2-digit R-B
offset, referring to Table 6-3, and press
Enter.

<< WHITE BALANCE ADJUSTMENT >>

INPUT DATA OF OFFSET FOR R-B --> 00

Mg-G offset screen

Input the corresponding 2-digit Mg-G
offset, referring to Table 6-3, and press
Enter.

Follow the instructions on PC display
thereafter. (Adjustment will be complete
when the camera adjustment menu
screen is restored.)

<< WHITE BALANCE ADJUSTMENT >>

INPUT DATA OF OFFSET FOR Mg-G --> 00

6.6

Chroma Gain Adjustment (Figs. 6-2, 6-3, 6-4)

Phenomenon due to incomplete adjustment:

The color of output image is denser than that of subject and/or lighter than
that of subject.

Test equipment/jig:

Oscilloscope (or vectorscope)

Test point:

Video output

Status during adjustment:

Attach a C12 light balancing filter.
Point at a color bar chart.

Procedure:

1) Input 5 or 6 to PC on the camera adjustment menu screen. (*1)

*1: The number to be input will differ depending on the model (B matrix

adjustment necessary or not): Input the number, following the camera
adjustment menu screen that appears on actual PC display.

Camera adjustment menu screen

Input 5 or 6 to PC (*1)

<Continued on next page>

***********************************************************

CAMERA ADJUSTMENT

***********************************************************

[1]

SAMPLING PULSE

[2]

AUTO IRIS CONTROL

[3]

SHUTTER 

[4]

B MATRIX

[5]

WHITE BALANCE

[6]

CHROMA GAIN

[ESC] RETURN TO MAIN MENU

Please select [1] - [6] or [ESC]

Содержание DZ-MV200A - Camcorder









































































































Отзывы: