45
V
a
rious Recor
d
ing
Te
chniques
Attaching the separately
sold lenses
Focusing range
• T (telephoto) side:
Approx. 3.2 feet (1 m) from the lens
surface to infinity.
• W (wide-angle) side:
Approx. 13/16
″
(2 cm) from the
lens surface to infinity.
Using the Separately-
Sold Lenses to
Increase the Wide-
Angle or Telephoto
Effect
Use the tele-conversion lens (DZ-
TL43 (sold separately) to increase the
telephoto effect, and the wide-
conversion lens DZ-WL43 (sold
separately) to increase the wide-angle
effect.
Make sure that the filter diameter is
43mm and the screw pitch 0.75mm.
HDD
BD-R RAM -RW (VR)
R
-RW (VF)
BD-RE
CARD
Conversion lens
Notes
• If you attach the DZ-TL43 conversion
lens, the focusing range at the T
(telephoto) side will be from approx.
9.84 feet (3 m) to infinity.
• When the white balance doesn’t
function, adjust the white balance
manually (p.49).
Adjusting the Focus
Manually
(Manual Focus)
If it is difficult to adjust the focus
automatically, you can adjust it
manually (Manual Focus). (See also
the hints on p.46.)
• When you zoom while the conversion
lens is attached, the four corners of the
screen may become a little dark or
scratchy at the W (Wide) side. (The
four corners may not be evenly dark.)
• When you are recording still pictures
with the wide-conversion lens
attached, the four corners of the
screen will become dark at the W
(Wide) side. If this happens, make it
less wide.
• When changing lenses, be careful not
to drop the camcorder.
• Attaching a conversion lens will
prevent you from using the flash.
Turn the “Flash” setting to “Off”
(p.52).
HDD
BD-R RAM -RW (VR)
R
-RW (VF)
BD-RE
CARD
