Hitachi DVPF2E, Инструкция по эксплуатации

Страница: 32 / 57

– 32 – EN
2C15
This DVD/VCR will operate with any cassette that
bears the VHS mark. For best results, we recommend
the use of high-quality tapes. Do
not use poor quality or damaged
tapes.
•
You can prevent accidental
erasing of a recording by break-
ing off the erase prevention tab on the back edge of
the cassette.
• If you decide to record on the tape again, cover the
hole with plastic tape.
VCR
Tab
Different countries use different television colour sys-
tems. Tapes recorded in the PAL or NTSC system can
be played back on this unit. Usually, the picture on the
TV screen will be in black and white when you play
back a tape that is recorded in a different colour sys-
tem.
• Tapes recorded in the NTSC system can be played
back on this unit and a PAL system TV set. This fea-
ture is only available in the SP mode. When playing
back such tapes, the picture may roll up or down,
shrink vertically and black bars may appear both at
the top and bottom of the screen. Adjust the vertical
hold control on your TV, if the TV features this con-
trol.
VCR
Before recording, select the tape speed : SP mode
(Standard Play) or LP mode (Long Play).
The table below shows the maximum recording/play-
back time using E-60, E-120, E-180 or E-240 tapes in
each mode.
T
YPE OF TAPE
R
ECORDING
/P
LAYBACK
T
IME
T
APE
S
PEED
SP M
ODE
LP M
ODE
E-60 1
HOUR
2
HOURS
E-120 2
HOURS
4
HOURS
E-180 3
HOURS
6
HOURS
E-240 4
HOURS
8
HOURS
A STATUS DISPLAY
To check the Counter, or Clock & Channel number, press the DISPLAY Button. Each time you press the
DISPLAY Button, TV screen will change as illustrated:
When you select the channel using the remote control number buttons, select the desired channel (position number).
VCR
■
SP
0:12:34
■
SP
17:40
P02
<CLOCK and CHANNEL
NUMBER mode>
<COUNTER mode>
Press once. Press once.
Press once.
<OFF mode>
VIDEO CASSETTE TAPE
TV COLOUR SYSTEM
TWO DIFFERENT TAPE SPEEDS