Hitachi DVPF2E, Инструкция по эксплуатации

Страница: 29 / 57

English
– 29 – EN
2C15
You can programme the timer using the PlusCode
programming numbers that are printed in TV guide
magazine. You can set eight programmes to record.
• Use the remote control for the this procedure.
• Insert a cassette tape with its erase prevention tab in
place. (If necessary, rewind or fast forward the tape
to the point at which you want to begin recording.)
1
Press the VIDEO Plus+
Button.
If you have not set the clock yet, “CLOCK” setting
menu appears. If so, follow the steps outlined in the
“Setting the Clock” section. Then, set the timer.
2
Press the Number Buttons to set the
PlusCode number of the programme you
want to record.
• Press the
h
Button to go back one digit from cur-
rent digit while you set the PlusCode number.
3
Select once, daily, everyday, or weekly
recording.
For once-only recording:
Press the VIDEO Plus+ Button.
For daily recording: To record a TV programme at
the same time on the same channel from Monday
through Friday. Press the DAILY/WEEKLY Button
repeatedly to select “DAILY (MO-FR)”, then, press
the VIDEO Plus+ Button.
For everyday recording: To record a TV programme
at the same time on the same channel every day.
Press the DAILY/WEEKLY Button repeatedly to
select “DAILY (MO-SU)”, then, press the VIDEO
Plus+ Button.
For weekly recording: To record a TV programme
at the same time on the same channel every week.
Press the DAILY/WEEKLY Button repeatedly to
select “WEEKLY”, then, press the VIDEO Plus+
Button.
Note
• If the PlusCode number is not available, it will be
cleared automatically when you press the VIDEO
Plus+ Button. Enter the correct PlusCode number
and press the VIDEO Plus+ Button again.
• If the PlusCode number flashes when you press the
VIDEO Plus+ Button, this means that the PlusCode
number you entered was incorrect or the timer
recording you just programmed and another timer
recording overlap.
4
Confirm the channel number, then, press
the
g
Button.
VCR
• If your local channel information is programmed in
DVD/VCR’s memory, your local channel number
appears automatically.
• If your local channel information is not programmed
in DVD/VCR’s memory, “– –” or an incorrect chan-
nel number may appear. In this case, press the
B
or
C
Button repeatedly until your desired channel num-
ber appears. Then, press the
g
Button.
• When you select the channel number using the
B
or
C
Button, it memorises in DVD/VCR’s memory.
5
Press the
B
or
C
Button repeatedly until the
desired
tape speed appears.
6
Press the
B
or
C
Button to choose “ON” or
“OFF”.
• The Programme Delivery Control (PDC) is a very
convenient system which assures that the TV pro-
grammes you have programmed for timer recording
will be recorded exactly from beginning to end (see
page 29).
7
Press the MENU Button to exit.
8
Press the TIMER SET Button to activate the
timer.
The TIMER SET light on the display comes on.
TIMER RECORDING USING
THE VIDEO Plus+ ® SYSTEM
PlusCode
N o . : - - - - - - - - -
PlusCode
N o . : 1 2 3 4 5 6 7 8 9
TIMER NUMBER 1
START
END
DATE
CHANNEL
PDC
SPEED
06/05 SA
19:30
20:30
16
SP
OFF
TIMER NUMBER 1
START
END
DATE
CHANNEL
SPEED
06/05 SA
19:30
20:30
16
SP
PDC
OFF
PDC(Programme Delivery Control)
The Programme Delivery Control (PDC) is a very
convenient system which assures that the TV pro-
grammes you have programmed for timer recording,
will be recorded exactly from beginning to end, even
if the actual broadcasting time differs from the sched-
uled time due to delayed start or extension of the pro-
gramme duration. Also, if a programme is interrupted
and, for example, some special news is broadcast, the
recording will also be interrupted automatically and
resumed when the programme continues.
When the PDC signal drop out because the broadcast
signal is weak, or when a broadcasting station does
not transmit a regular PDC signal, the timer recording
will be performed in the normal mode (without PDC)
even if it was programmed for PDC. When the start-
ing time of the PDC timer recording is from 0:00 to
3:59 on a given day, the PDC function operates from
20:00 on the previous day to 4:00 on the following
day. When the starting time of the PDC timer record-
ing is from 4:00 to 23:59 on the given day, the PDC
function operates from 0:00 on the day to 4:00 on the
following day. This means that if the relevant pro-
gramme is broadcasted within this period, it will be
recorded correctly. if the timer is not programmed cor-
rectly, the incorrect timer setting stays in effect unless
you cancel it. To cancel the incorrect timer setting,
refer to “TO CANCEL
OR CHECK THE
START/END TIME’’ on page 28.
VCR