Hitachi DVPF2E, Инструкция по эксплуатации

Страница: 30 / 57

– 30 – EN
2C15
This function enables you to search and confirm the
contents of the recorded programme(s) using the
index mark.
• Use the remote control for this procedure.
• The tape must be fully rewound.
1
Press the QUICK-FIND Button.
TO SKIP TO THE BEGINNING OF NEXT PRO-
GRAMME
Press the QUICK-FIND Button.
TO VIEW AT NORMAL SPEED
Press the
B
Button
.
The Quick-Find is cancelled.
Notes
• This function will not operate in the Recording
mode.
• When you want to cancel the Quick-Find while in
progress, press the
C
Button.
• When the end of a tape is reached during the Quick-
Find, the tape will automatically rewind to the begin-
ning. After rewinding finishes, the DVD/VCR will
eject the tape.
VCR
• The index mark will be made automatically when
REC is pressed. It will also be marked at the starting
point of Timer recording and OTR.
• The index mark is not recorded if the
F
Button is
pressed and released during recording.
• The time gap between index marks on the tape
should be greater than 1 minute for SP recording and
2 minutes for LP recording.
• Use the remote control for this procedure.
1
Press the INDEX SEARCH Button
(
j
)
.
2
Press the
B
,
C
or INDEX SEARCH Button
(
j
) repeatedly until the number of pro-
grammes that you want to skip appears.
3
Press the
h
or
g
Button.
The DVD/VCR begins rewinding or fast forwarding
to the beginning of desired programme.
When the preset programme is reached, the
DVD/VCR will start playback automatically.
Notes
• Index Search can be set up to 20.
• This function will not operate in the Recording
mode.
• Operations must be followed up within 30 seconds,
from steps 2 to 3. Otherwise the Index Search mode
will be cancelled.
• To exit the Index Search mode, press the MENU
Button in step 2. Or press the
C
Button after step 3.
VCR
If a tape includes both programmes recorded in the
PAL system and ones recorded in the NTSC system,
this function may not be operated correctly.
• Use the remote control for this procedure.
1
Press the TIME SEARCH Button (
G
) .
VCR
AUTO RETURN
QUICK-FIND
TIME SEARCH
2
Press the
B
,
C
or TIME SEARCH Button
(
G
) repeatedly until the desired time
appears.
3
Press the
h
or
g
Button.
The DVD/VCR begins rewinding or fast forwarding to
the specified point.
When 0:00 is reached, the DVD/VCR will start play-
back automatically.
Notes
• Time Search can be set up to 9 hours 59 minutes
(9:59). When you press the TIME SEARCH Button
(
G
)
in step 2, it will increase the time by 15 min-
utes. In this case, Time Search can be set up to 9
hours 45 minutes (9:45).
• This function will not operate in the Recording
mode.
• Operations must be followed up within 30 seconds,
from steps 2 to 3. Otherwise the Time Search mode
will be cancelled.
• To exit the Time Search mode, press the MENU
Button in step 2. Or press the
C
Button after step 3.
INDEX SEARCH
If there are any remaining programmes including
Daily, Everyday, & Weekly, AUTO RETURN will not
operate.
1
Press the MENU Button.
2
Press the
B
or
C
Button repeatedly to
point to “SET UP”, then press the
g
Button.
3
Press the
B
or
C
Button to point to “AUTO
RETURN”, then press the
g
button.
• [AUTO] will appear next to “AUTO RETURN”.
4
Press the MENU Button.
TO WATCH THE RECORDED TIMER PROGRAMME
Press the TIMER SET Button to cancel the Timer
Stand-by. Then, Select VCR mode by pressing the
VCR Button on your remote. Press the
B
Button.
VCR