S
af
et
y
In
fo
rm
at
io
n
an
d
Ta
bl
e
of
C
on
te
nt
P
ro
du
ct
I
nt
ro
du
ct
io
n
an
d
Setting the Player
System Set-up
Troubleshooting and
Specification
Im
po
rt
an
t
Notice
GB-15
Playable Disc / Supportive Formats
Playback Functions
System Set-up
Selecting the Matching Colour System
In order for the disc to play, the colour system
of the DVD player, disc and TV should match.
TV SYSTEM
NTSC
SCREEN SAVER
PAL
VIDEO AUTO
TV TYPE
PASSWORD
RATING
DEFAULT
Press the SETUP button.
1.
Press
2.
▲▼
buttons to select TV SYSTEM,
and press
►
button.
Use
3.
▲▼
buttons to select the following
options: NTSC, PAL and AUTO.
Select your preferred tion and press OK
4.
button to confirm.
CHANGING PAL TO NTSC:
1. ENSURE THAT YOUR TV
SUPPORTS NTSC STANDARD.
2. IF THERE IS DISTORTED
PICTURE DISPLAY ON THE TV
WAIT 15S FOR AUTO RECOVERY.
OK
NO
Screen Saver Function
Select ON to display the screen saver with a
moving DVD logo appears on a dark screen
when the disc playback is stopped, paused, or
you have not used the player nor its remote for
more than 5 minutes while its power is still on.
Select OFF to turn off the screen saver function.
Video Setup
Press the SETUP button.
1.
Press
2.
▲▼
buttons to select VIDEO, and
and press
►
button.
Use
3.
▲▼
buttons to select the following
options: INTERLACE-YUV, TV-RGB and
P-SCAN YPBPR.
INTERLACE-YUV
- Performs interlaced
scanning and it is common in standard TV
system. The playback will be scanned on
alternate rows only. Use the component
video cable (YPbPr) to connect the player
to the TV and set both the TV and the
DVD player to INTERLACE-YUV or
INTERLACE-YPBPR.
TV-RGB -
It is the default setting of the
DVD player. Through SCART to send RGB
signal, which red, green, blue lights are
added together in various ways to
reproduce a broad array of colours.
Connects the SCART cable from the DVD
player to the TV and set the TV in SCART
mode and the DVD player in TV-RGB.
P-SCAN YPBPR -
Performs progressive
scanning to display or transmitting the
playback in which all the lines of each
frame are drawing sequence. Use
component video cables (YPbPr) to
connect the player to the TV and set both
the player and the TV to progressive scan.
For detail setting of progressive scanning,
refer to
Setting up the Progressive Scan
.
Press OK button to confirm.
4.
NOTE: YUV is the same as YPBPR.
TV Type
In order to display the playback in the correct
size format, both the DVD player and the TV
should select the same display size format.
Press the SETUP button.
1.
Press
2.
▲▼
buttons to select TV TYPE,
and press
►
button.
Use
3.
▲▼
buttons to select the following
options: 4:3PS, 4:3LB and 16:9.
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
4:3PS
4:3LB
16:9
4:3PS
- Selects this if you have a
standard TV and want both sides of the
picture to be trimmed or fomatted to fit
your TV screen.
