English -
29
S
ystem
S
etup
NICAM programmes are divided into 3 types. NICAM
Stereo, NICAM Mono and Bilingual (transmission in
another language). NICAM programmes are always
accompanied by a standard mono sound broadcast
and you can select the desired sound by setting
NICAM on or off.
With the unit in stop mode, press the
MENU button on the remote.
Select “Setup” using
34
buttons, then
press the
1
or OK button.
Using the
34
buttons, move the
selection bar to “System” then press
1
or OK to select.
Using the
34
buttons, move the
selection bar to “NICAM” then press
1
or OK to select.
Using the
34
and OK buttons, select
“On” or “Off”.
•
Off:
Only set at this position to record the standard
mono sound during a NICAM broadcast if the
stereo sound is distorted due to inferior
reception conditions.
•
On:
NICAM mode
5
4
3
2
1
Setting Up NICAM
Options
RETURN
OK
MOVE
EXIT
Setup
DVD-RAM(VR)
System
√
Language
√
Audio
√
Video
√
Parental Control
√
RETURN
OK
MOVE
EXIT
System
DVD-RAM(VR)
Clock Set
Install
CM Skip Time
: 15 Sec
AV 1 Output
: Video
NICAM
: On
Setting Up SCART Jack
Options
If you connect external device (VCR/satellite
receiver/cable box) or TV to DVD Recoder with Scart
Jack (21-pin), you need to set this option.
With the unit in stop mode, press the
MENU button on the remote.
Select “Setup” using
34
buttons, then
press the
1
or OK button.
Using the
34
buttons, move the
selection bar to “System” then press
1
or OK to select.
Using the
34
buttons, move the
selection bar to “AV1 Output” then press
1
or OK to select.
Using the
34
and OK buttons, select
“Video” or “RGB” to suit the AV terminal
of TV.
• AV2 input option will be set automatically according
to the signal of external device (VCR/satellite
receiver/cable box).
5
4
3
2
1
RETURN
OK
MOVE
EXIT
Setup
DVD-RAM(VR)
System
Language
Audio
Video
Parental Control
RETURN
OK
MOVE
EXIT
System
DVD-RAM(VR)
Clock Set
Install
CM Skip Time
: 15 Sec
AV 1 Output
: Video
NICAM
: