– 18 –
EN
1L25
PICTURE SEARCH
If you want to skip or repeat a scene during playback,
press
D
or
E
.
¡
Press it again and the DVD/VCR will now search at
super high speed. (in the LP/SLP modes only).
INDEX SEARCH
An index mark will be assigned at the beginning of each
recording you make. You may skip to a specific marked
point by following the steps below.
1
Press SEARCH MODE so that the Index
Search menu appears.
2
Enter the number of recordings you wish to
skip by pressing
K
or
L
within 30 seconds.
3
Press
B
or
{
to start index search.
¡
If you want to go in the forward direction, press
B
.
If you want to go in the reverse direction, press
{
.
¡
If you want to stop search function, press STOP.
¡
After index search, the DVD/VCR will play the tape
automatically.
TIME SEARCH
This feature allows you to go to a specific point on a
tape by entering the exact amount of time you wish to
skip in order to reach the point.
1
Press SEARCH MODE so that the Time
Search menu appears.
2
Enter your desired time to
skip by pressing
K
or
L
within 30 seconds.
3
Press
B
or
{
to start time search.
¡
If you want to go in the forward direction, press
B
.
¡
If you want to go in the reverse direction, press
{
.
¡
If you want to stop search function, press STOP.
¡
After time search, the DVD/VCR will play the tape
automatically.
VCR
PLAYBACK FUNCTION
NORMAL PLAYBACK
1
Insert a prerecorded tape. The DVD/VCR will
turn on.
¡
If the safety tab has been removed, the
DVD/VCR will start playback automatically.
¡
If a cassette is in DVD/VCR, STOP sym-
bol appears in TV screen when turning on the
DVD/VCR(VCR mode), and “
” appears in the
front panel display.
2
Turn on the TV and set the TV to channel 3.
¡
If noise appears, change the RF output channel of the
DVD/VCR to channel 4 by pressing PLAY for 3 seconds
during playback. Then select the same channel (CH4) on
your TV. (See “RF Output Channel” on page 14 for more
details.)
¡
If you connect a TV to the DVD/VCR using AV
cable, set the TV to channel AUX. (VIDEO)
3
Begin playback by pressing PLAY.
¡
Tracking adjustment will be done automatically
(Digital Tracking function) when you start playback.
To adjust the tracking manually, press SKIP/CH on
the remote or CHANNEL (
o
/
p
) on the DVD/VCR.
¡
When a tape has reached the end, the DVD/VCR will rewind
the tape to the beginning and eject the tape automatically.
4
To stop playback, press STOP.
¡
If no corresponding symbols appear on the display
when you press buttons such as PLAY, REC/OTR,
D
or
E
, that means no cassette tape is in the
DVD/VCR. Please insert a tape.
VCR
STILL/SLOW
You can freeze the picture on TV screen by pressing
PAUSE/STEP during playback.
¡
You can advance the picture one frame at a time by
pressing PAUSE/STEP during the Still mode.
¡
You cannot manually adjust the tracking of a still pic-
ture. However, if the picture begins to vibrate vertical-
ly during the still mode, you can stabilize the picture by
pressing CH (
o
/
p
).
¡
If the picture is distorted or rolling vertically, adjust the
vertical hold control on your TV, if so equipped.
¡
You can watch in the slow motion by pressing SLOW
during playback or the still mode.
¡
If a noise bar appears on the TV screen, you can reduce
it by pressing CH (
o
/
p
).
¡
After the DVD/VCR has been in Still/Slow mode for 5
minutes, it will stop automatically to protect the tape
and the video head from damage.
¡
To return to playback, press PLAY.
AUTO REPEAT PLAYBACK
This feature allows you to play a tape over and over.
1
Select main menu by pressing MENU.
2
Select "AUTO REPEAT" by pressing
K
or
L
.
3
Begin auto repeat playback by pressing
B
so that ON appears next to "AUTO REPEAT".
¡
If the on-screen menu still remains, press
CLEAR/C.RESET to exit the menu.
¡
To cancel the Auto repeat mode, press
B
at step [3]
so that OFF appears next to "AUTO REPEAT".
VCR
SEARCH FUNCTIONS
TIME SEARCH
2 : 50
INDEX SEARCH
03
Counter Reset
¡
You can reset the counter by pressing
CLEAR/C.RESET on the remote control.
H9651UD.qx3 04.3.2 8:54 PM Page 18
Содержание DV PF74U
Страница 41: ...MEMO ...
