-7-
4. Reassembly of the armature unit
(1) Mounting the Motor Spacer
[35]
Mount the Motor Spacer
[35]
to the Armature and Pinion Set
[36]
. If mounting proves too difficult, use a
hand press to support the Motor Spacer
[35]
and press down on the rear end of the armature shaft of
the Armature and Pinion Set
[36]
(Fig. 9).
(2) Mounting the Magnet
[37]
Mount the Magnet
[37]
to the Armature and Pinion Set
[36]
so that the notch of the Magnet
[37]
faces
the rear of the Armature and Pinion Set
[36]
. Hold each part securely as the Armature and Pinion Set
[36]
may be attracted to the Magnet
[37]
by strong magnetic force.
NOTE: When mounting the Magnet [37], note that the ball bearing and washer at the rear of the
Armature and Pinion Set [36] may come off due to the strong magnetic force of the
Magnet [37].
5. Reassembly of the drive unit
(1) Fit the protrusions of the Motor Spacer
[35]
into the concave portions of the Rear Case
[21]
by
engaging the pinion of the Armature and Pinion Set
[36]
with Planet Gear (A) Set (4 pcs.)
[32]
. Turn
the assembly fully clockwise as viewed from the rear of the Armature and Pinion Set
[36]
(Fig. 10).
Fig. 9
Motor Spacer
[35]
Fan
Armature and Pinion Set
[36]
Ball bearing
Magnet
[37]
Notch
Fig. 10
Pinion
Motor Spacer
[35]
Protrusions
Washer (B)
Planet Gear (A) Set (4 pcs.)
[32]
Rear Case
[21]
Concave portions
