-6-
3. Reassembly of the gear unit
(1) Mount Washer (A)
[13]
, Lock Ring (A)
[14]
, and
the Lock Cam
[16]
to the Front Case
[10]
.
The protrusion of Lock Ring (A)
[14]
aligns with
the concave portion of the Front Case
[10]
(Fig. 6).
(2) Mount the Needle Roller Set (6 pcs.)
[15]
.
NOTE : Apply grease (MOLUB-ARROY
NO. 777-1) to the inner portion of
Lock Ring (A) [14].
(3) Apply grease (Shell Alvania RL3) to the engaging portions of each gear, and the claw portion of the
Ring Gear
[19]
.
(4) Mount the parts from the Pin Set (6 pcs.)
[12]
to Washer (B)
[34]
in order (Fig. 7).
• Pay attention to the needle mounting direction of the Ring Gear
[19]
, Carrier
[17]
, Slide Ring Gear
[27]
, Pinion (C)
[25]
, and Pinion (B)
[30]
(Fig. 7).
• Mount the Front Case
[10]
to the Rear Case
[21]
so that the concave portions of the Front Case
[10]
align with the protrusions of the Rear Case
[21]
.
Fit the protrusions of Washer (B)
[34]
into the concave portions of the Rear Case
[21]
, and then turn
Washer (B)
[34]
clockwise (as viewed from the armature) until it contacts the Rear Case
[21]
(Fig. 8).
Fig. 6
Front Case
[10]
Lock Ring (A)
[14]
Lock Cam
[16]
Washer (A)
[13]
Needle Roller Set (6 pcs.)
[15]
Concave
portion
Protrusion
Fig. 7
Fig. 8
Rear Case
[21]
Concave portions
Protrusions
Front Case
[10]
Pin Set (6 pcs.)
[12]
Carrier
[17]
Planet Gear (C) Set (5 pcs.)
[18]
Ring Gear
[19]
Washer (A)
[20]
Rear Case
[21]
Screw Set M3 x 12 (4 pcs.)
[24]
Pinion (C)
[25]
Planet Gear (B) Set (4 pcs.)
[26]
Slide Ring Gear
[27]
Pinion (B)
[30]
Needle Bearing Set (4 pcs.)
[31]
Planet Gear (A) Set (4 pcs.)
[32]
First Ring Gear
[33]
Washer (B)
[34]
Washer (B)
[34]
