Hitachi DS240, Руководство по обслуживанию

Страница: 98 / 174

R
AIL
K
IT
A
SSEMBLY
R
AIL
K
IT
A
SSEMBLY
3-2
3.1 Rail Kit Assembly
Make sure you have a stable, clean working environment. Dust and dirt can get into com-
puter components and cause a malfunction. Many of the screws on the server are different
sizes; use containers to keep screws and small components separated.
Adequate lighting and proper tools can prevent you from accidentally damaging internal
components. Most of the following procedures require only a few simple tools, including
the following:

A Philips screwdriver

A flat-tipped screwdriver

A set of jeweler’s screwdrivers

A grounding strap

An anti-static pad
Humid environments tend to have less static electricity than dry environments. A ground-
ing strap is warranted whenever danger of static electricity exists.
Assembling the rail kit involves the following procedures:

Rack Installation Overview

Installing the Rails
CAUTION!
T
O INSTALL TWO SYSTEMS
,
INSTALL THE FIRST SYSTEM IN THE LOWEST AVAILABLE POSITION
.
CAUTION!
D
UE TO WEIGH AND HEIGHT CONSIDERATIONS
,
MORE THAN ONE PERSON IS RECOMMENDED TO INSTALL A SYS
-
TEM IN THE RACK
.
CAUTION!
ONLY PULL ONE COMPONENT OUT OF THE RACK AT A TIME TO PREVENT THE RACK FROM TIPPING OVER
.
CAUTION!
M
ORE
T
HAN ONE PERSON IS RECOMMENDED TO LIFT THE SYSTEM
.
!
!
!
!