manualshive.com logo in svg

Hitachi DS240, Руководство по обслуживанию

Поделиться
Скачать
Hitachi DS240 Скачать руководство пользователя страница 121

BIOS

BIOS U

PDATE

 U

TILITY

4-16

4.2

 

BIOS Update Utility

The flash ROM contains system initialization routines, the BIOS Setup Utility, and runtime 
support routines. The exact layout is subject to change, as determined by BIOS. The flash 
ROM also contains initialization code in compressed form for onboard peripherals, like 
SCSI, NIC and video controllers. The complete ROM is visible, starting at physical address 
4 GB minus the size of the flash ROM device. 

A 16-KB parameter block in the flash ROM is dedicated to storing configuration data that 
controls the system configuration (ESCD). Application software must use standard APIs to 
access these areas; application software cannot access the data directly.

BIOS Update Utility

Server platforms support DOS-based, Windows-based and Linux-based firmware update 
utilities. This utility loads a fresh copy of the BIOS into the flash ROM.

The BIOS update may affect the following items:

The system BIOS setup utility and strings

Onboard video BIOS, RAID BIOS, and other option ROMS for the devices embedded
on the server board

Memory reference code

Microcode updates

ME Firmware

ME Region Update

The update utility also provides the ME region update function. Refer to the README.txt 
for additional information.

Note:

There’s another Server Platform Services firmware running in Management 
Engine (ME) microcontroller present in the Intel® chipset. And this ME firmware 

is 

placed in the region 

that is

 included in the BIOS BIN file for Intel® platform only. 

We provide two script file

s

 

that can

 update 

the 

BIOS and update 

the 

ME region 

separately.

BIOS Setting Utility

Use AMISCE to import/export BIOS setting

s

 in

 the 

OS:

1.

Export 

the 

BIOS setting and generate 

a 

script 

file:

.SCELNX_64 /o /s NVRAM.txt

2.

Import BIOS setting with script file:

.SCELNX_64 /i /s NVRAM.txt 

Содержание DS240















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды