Hitachi DH 40SR Скачать руководство пользователя страница 17

Страница: 17 / 37

--- 14 ---

Mechanism to prevent idle hammering

When the working tool is released from the workpiece, slide sleeve (A) and the second hammer are forcibly

moved to the position illustrated in Fig. 4 by spring (A), and the striker moves out of striking position. When

this occurs, the air holes located at the position unaffected by the rebound of the striker at no load are opened

and the pressure within the air chamber remains unchanged even though the piston continues to reciprocate,

thereby preventing striking operation.

Second hammer

Moving distance of the second hammer and the striker

Air chamber

Slide sleeve (A)

Air hole

Fig. 4

Sleeve (A)

Slide ring

Spring (A)

Striker

Shock-absorbing mechanism

At the instance of releasing the working tool from the workpiece by moving the main body up, the second

hammer contacts driver as shown in Fig. 5 then the cushion (damper (B)) provided between driver holder and

front cover absorbs the striking force of the second hammer. Thus the durability of the Model DH 40SR is

increased greatly because the second hammer does not strike the tool retainer directly.

Fig. 5

Damper (B)

Driver holder

Second hammer

Driver

Front cover

Содержание DH 40SR






































Результаты поиска

Содержание DH 40SR

Отзывы:

Похожие инструкции для DH 40SR

Бренды по названию

Популярные бренды

Hitachi DH 40SR, Руководство по обслуживанию и технические данные

Результаты поиска

Содержание DH 40SR

Отзывы:

Похожие инструкции для DH 40SR

Бренды по названию

Популярные бренды