Hitachi DH 22PH Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 39

Hitachi DH 22PH Скачать руководство пользователя страница 13

-10-

1. Safety Instructions

In the interest of promoting the safest and most efficient use of the Model DH 22PH Rotary Hammer by all
of our customers, it is very important when conducting a sale that the salesperson carefully ensure that the
buyer seriously recognizes the importance of the Handling Instructions, and fully understands the
precautions listed on the Caution Plate and Nameplate attached to each tool.

A. Handling Instructions

Although every effort is made in each step of design, manufacture, and inspection to provide protection
against safety hazards, the dangers inherent in using any electric tool cannot be completely eliminated.
Accordingly, the Handling Instructions list general precautions and suggestions on the use of electric power
tools, and specific precautions and suggestions on the use of the Rotary Hammer to enhance the safe,
efficient use of the tool by the customer. Salespersons must be thoroughly familiar with the contents of the
Handling Instructions in order to offer appropriate guidance to customers during sales promotion activities.

B. Caution Plate

Each Model DH 22PH unit is provided with a Caution Plate (shown below) that lists basic safety precautions
on its use. Carefully ensure that customers fully understand and follow these precautions before using the
tool.

[For the USA and Canada]

[For China]

[For Mexico]

[For Taiwan]

PRECAUTIONS ON SALES PROMOTION

«
...
11
12
13
14
15
...
»

Содержание DH 22PH








































Отзывы:

Нет отзывов