35
3.4 Passcode connection (continued)
3. Using the Live Mode
Windows prevented network configuration
changes.
You may log in the Windows under User
authority.
Click
[OK]
, then the “Live Viewer 3” main
menu is displayed even though the network
is not established. Click on the main and
go back to the item
3.3.3 Connecting to the
network
. (
31
)
n
A network connection could not be established.
Consult to the network administrator. Log in the Windows under Administrator
authority. After that, please resume at the item
3.3.1 Starting the “Live Viewer
3”
. (
26
)
The reason is that the IP address set in the
projector is the global address.
Following the instruction by the network
administrator, set the IP address and Subnet
mask in the “Live Viewer 3”.
After input these address, click
[Connect]
.
n
Automatic connection failed.
• If the IP address you input to the PC is the same as the one set in the
projector, a warning message will come up. Please choose an IP address that
is currently not in use.
NOTE
If you want to erase the information you input, click
[Reset]
.
