Hitachi CP-X600 series Скачать руководство пользователя

Страница: 61 / 64

Phenomena that may be easy to be mistaken for machine defects (continued)

Phenomenon

Cases not involving a machine defect

Reference

page

Sound does not

come out.

The signal cables are not correctly connected.

Correctly connect the audio cables.

The MUTE function is working.

Restore the sound pressing the MUTE or VOLUME button

on the remote control.

The volume is adjusted to an extremely low level.

Adjust the volume to a higher level using the menu function

or the remote control.

The AUDIO setting is not correct.

Correctly set the items in the AUDIO menu.

No pictures are

displayed.

The lens cap is attached.

Remove the lens cover.

4, 5

The signal cables are not correctly connected.

Correctly connect the connection cables.

The brightness is adjusted to an extremely low level.

Adjust BRIGHTNESS to a higher level using the menu

function or the remote control.

4, 5

The computer cannot detect the projector as a plug

and play monitor.

Make sure that the computer can detect a plug and play

monitor using another plug and play monitor.

The BLANK screen is displayed.

Press the BLANK button on the remote control.

Video screen

display freezes.

The FREEZE function is working.

Press the FREEZE button to restore the screen to normal.

Colors have a

faded- out

appearance, or

Color tone is

poor.

Color settings are not correctly adjusted.

Perform picture adjustments by changing the COLOR

TEMP, COLOR, TINT and/or COLOR SPACE settings,

using the menu functions.

4, 6,

COLOR SPACE setting is not suitable.

Change the COLOR SPACE setting to AUTO, RGB,

SMPTE40, REC709 or REC60.

Troubleshooting

Содержание CP-X600 series

































































Результаты поиска

Содержание CP-X600 series

Отзывы:

Похожие инструкции для CP-X600 series

Бренды по названию

Популярные бренды

Hitachi CP-X600 series, Руководство по эксплуатации

Результаты поиска

Содержание CP-X600 series

Отзывы:

Похожие инструкции для CP-X600 series

Бренды по названию

Популярные бренды