Hitachi CP-X600 series Скачать руководство пользователя

Страница: 60 / 64

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects

WARNING

►

Never use the projector if abnormal operations such as

smoke, strange odor, excessive sound, damaged casing or elements or cables,

penetration of liquids or foreign matter, etc. should occur. In such cases,

immediately turn off the power switch and then disconnect the power plug from

the power outlet. After making sure that the smoke or odor has stopped, contact

your dealer or service company.

Before requesting repair, please check in accordance

with the following chart. This operation sometimes

resolves your problem.

If the situation cannot be corrected,

The projector’s microprocessor may need to be reset.

Please push the Shutdown switch by using a pin or

similar and the projector will be turned off immediately.

Before turning it again, wait at least 0 minutes to make the projector cool down enough.

Some setting may be wrong. Please use the FACTORY RESET function of the

SERVICE item in the OPTION menu

(



)

to reset all settings to factory default.

Then, if the problem is not removed after the remedy, please contact your dealer

or service company.

Phenomenon

Cases not involving a machine defect

Reference

page

Power does not

come on.

The electrical power cord is not plugged in.

Correctly connect the power cord.

The power switch is not set to the on position.

Set the power switch to [ | ] (On).

The main power source has been interrupted during

operation such as by a power outage (blackout), etc.

Please turn the power off, and allow the projector to cool

down at least minutes, then turn the power on again.

Either there is no lamp and/or lamp cover, or either

of these has not been properly fixed.

Please turn the power off, and allow the projector to cool down

at least 45 minutes. After the projector has sufficiently cooled

down, please make confirmation of the attachment state of the

lamp and lamp cover, and then turn the power on again.

Neither sounds

nor pictures are

outputted.

The signal cables are not correctly connected.

Correctly connect the connection cables.

Signal source does not correctly work.

Correctly set up the signal source device by referring to the

manual of the source device.

–

The input changeover settings are mismatched.

Select the input signal, and correct the settings.

7, 8

Содержание CP-X600 series

































































Результаты поиска

Содержание CP-X600 series

Отзывы:

Похожие инструкции для CP-X600 series

Бренды по названию

Популярные бренды

Hitachi CP-X600 series, Руководство по эксплуатации

Результаты поиска

Содержание CP-X600 series

Отзывы:

Похожие инструкции для CP-X600 series

Бренды по названию

Популярные бренды