Hitachi CP-X600 series Скачать руководство пользователя

Страница: 59 / 64

Troubleshooting

Regarding the indicator lamps (continued)

POWER

indicator

LAMP

indicator

TEMP

indicator

Description

Blinking

Red

Lighting

Red

Turned

off

Blinking

Red

The cooling fan is not operating.

Please turn the power off, and allow the projector to

cool down at least 0 minutes. After the projector has

sufficiently cooled down, please make confirmation

that no foreign matter has become caught in the fan,

etc., and then turn the power on again.

If the same indication is displayed after the remedy,

please contact your dealer or service company.

Blinking

Red

Lighting

Red

Turned

off

Lighting

Red

There is a possibility that the interior portion

has become heated.

Please turn the power off, and allow the projector to

cool down at least 0 minutes. After the projector has

sufficiently cooled down, please make confirmation of

the following items, and then turn the power on again.

• Is there blockage of the air passage aperture?

• Is the air filter dirty?

• Does the peripheral temperature exceed 35°C?

If the same indication is displayed after the remedy,

please set FAN SPEED of the SERVICE item in the

OPTION menu to HIGH.

Lighting

Green

Simultaneous

blinking in

Red

It is time to clean the air filter.

Please immediately turn the power off, and clean or

change the air filter referring to the section “Air Filter”.

After cleaning or changing the air filter, please be sure

to reset the filter timer. After the remedy, reset the

power to ON.

Lighting

Green

Alternative

blinking in

Red

There is a possibility that the interior portion

has become overcooled.

Please use the unit within the usage temperature

parameters (5°C to 35°C). After the treatment, reset

the power to ON.

NOTE

• When the interior portion has become overheated, for safety

purposes, the power source is automatically turned off, and the indicator lamps

may also be turned off. In such a case, press the “



” (OFF) side of the power

switch, and wait at least 45 minutes. After the projector has sufficiently cooled

down, please make confirmation of the attachment state of the lamp and lamp

cover, and then turn the power on again.

Содержание CP-X600 series

































































Результаты поиска

Содержание CP-X600 series

Отзывы:

Похожие инструкции для CP-X600 series

Бренды по названию

Популярные бренды

Hitachi CP-X600 series, Руководство по эксплуатации

Результаты поиска

Содержание CP-X600 series

Отзывы:

Похожие инструкции для CP-X600 series

Бренды по названию

Популярные бренды